The Storm32BGC 32-bit Brushless Gimbal Control Board with MPU6050 Sensor utilizes STM32F103RC running at 72MHz to deliver stable performance during every flight. With onboard gyro and acceleration sensor MPU6050, it enables the gimbal to complete more actions. It has three AUX ports and 7CH PWM/Sum-PPM input/output. It is also built with an I2C port so external 6050 could be used to replace onboard sensor. Plus, each axis could connect analog joystick, which may be needed on SLR handheld gimbal.<!--Features --><p>FEATURES</p><ul><li> STM32F103RC processor at 72MHz</li><li> Onboard gyro and acceleration sensor MPU6050 to enable more action</li><li> 3 AUX ports</li><li> 7CH PWM/Sum-PPM input/output</li><li> With I2C port (I2C#2), external 6050 could be used to replace onboard sensor </li><li> Each axis could connect analog joystick, which may be needed on SLR handheld gimbal </li></ul><!--Specifications --><p>Specifications</p><table width="100%" border="0" cellpadding="0" cellspacing="0"><tbody><tr><td width="131"> Model</td><td width="365"> Storm32BGC</td></tr><tr><td width="131"> Power Supply</td><td width="365"> 3S 12V</td></tr><tr><td width="131"> Version</td><td width="365"> V1.3</td></tr><tr><td width="131"> Drive Motor Current</td><td width="365"> Max 2A per Motor</td></tr><tr><td width="131"> Processor</td><td width="365"> STM32F103RC at 72 MHz</td></tr><tr><td width="131"> Screw Hole</td><td width="365"> M3 Screw Hole</td></tr><tr><td width="131"> Pitch</td><td width="365"> 45mm</td></tr><tr><td width="131"> Dimensions</td><td width="365"> (1.97 x 1.97 x 0.39)" / (5 x 5 x 1)cm (L x W x H)</td></tr><tr><td width="131"> Weight</td><td width="365"> 0.88oz / 25g </td></tr></tbody> </table><!--Package Includes --><p>Package Includes</p><ul><li>1 x Brushless Controller</li><li>1 x Controller Case</li><li>1 x MPU6050 Sensor</li><li>1 x Sensor Case</li><li>1 x Pin Header</li><li>1 x Sensor Connecting Cable</li></ul><!--Extra Info --><!--produts_compatibility -->