Brand Name:
meitk
Model Number:
due923

Wireless Bluetooth Audio Receiver/Transmitter 2-in-1 Low latency aduio streaming612345

Description:
 
Bluetooth Transmitter & Receiver
 
This device is a 2-in-1 Bluetooth receiver and transmitter which incorporates codec for less high audio quality technology. It is very simple to use and enables any Bluetooth enabled music device to connect to both Bluetooth and non-Bluetooth devices. It can be used to enable a phone to transmit music to a home stereo system or just as easily， to allow a CD player or other device to transmit music to a Bluetooth enabled speaker system or headphones. This device also supports online games， TV， Movie audio and real-music transmission since it with low latency. With a compact design and internal rechargeable battery with long play time， this device is the ideal solution to link your music devices any time and any place you need it. 
 
Specifications:
 
Bluetooth V2.1+EDR
Bluetooth profile supported:A2DP and AVRCP
Supported codec: SBC
Operation range: Class 2~10 meters
TX mode working time: up to 8 hours
RX mode working time: up to 7.5 hours
Standby time: up to 200hours
Charging Time: about 1.5 hours
Charging input voltage: DC 5V
Battery:170mAh rechargeable Li-polymer battery

Note:
The working and standby time may vary when used with different mobile phones or other compatible Bluetooth devices， usage setting， usage styles and environments.
 
Receiver: pairing with a Bluetooth device:
 
1. Plug the 3.5mm audio cable into this device 3.5mm audio jack .Plug the other end into the audio input of your home hi-fi stereo system.(ordinary speaker).
2. Put this device and your Bluetooth-enabled phone within 10 meters.
3. Make your phone into Bluetooth mode. Taking an I Phone as an example :From your I Phone home page ，tap “settings” →“general”→“Bluetooth” →“on”.
Note :
different phones and tablets have different procedures to activate the Bluetooth function ，pair ，connect with other Bluetooth devices.
4. I Phone will auto-scan for available Bluetooth devices， Click ”Bluetooth-TR” from the list of devices shown ;Tap “yes” or confirm” accordingly.
5. After successfully pairing ，the LED will be on.

Note:
a). Pairing mode will last 3 minutes. The device will enter off mode if no devices can be connected within 3 minutes .
b). If you have failed to pair ，please power off the device and try again according to above steps.
c). Each time this device powers on ，it will connect to the last connected device automatically .If you want to pair it to the other devices ，turn off the current
device’s Bluetooth function first and try to pair the receiver to the new device according to above mentioned pairing procedures. 
 
Receiver: pairing with a Bluetooth device
 
1). Ensure this device have pushed into TX mode.
2). Plug 3.5mm audio cable into this device 3.5mm audio socket.plug the other
end(or 2*RCA) into the audio output of an audio source system(Audio jack).
3).Put this device and your Bluetooth stereo receiver device(bluetooth earphone)
with in 10m.
4). Power on your Bluetooth stereo receiver and put device and
put it into pairing mode.
5). LED blinks red and blue quickly，indicating it is in pairing mode.
6). This device will automatically search，pair and connect with your bluetooth Stereo receiver devices.

7). After successful connection，the LED will blink blue slowly.Pairing is completed.

8). Pairing is completed now you can enjoy the wireless audio.


Note:
After this device，under TX mode，has been connected to a Bluetooth stereo device，you can stream music wirelessly.
Before pairing，please make sure your Bluetooth stereo receiver supports Bluetooth A2DP. 
 
 
 
Package Included:
 
1 x Bluetooth transmitter & receiver
2 x 3.5mm to 3.5mm Audio Cable
3 x USB charging cable
4 x User manual
5 x 3.5mm to AV audio cable
 
';
Unit Type:
piece
Package Weight:
0.500kg (1.10lb.)
Package Size:
12cm x 15cm x 15cm (4.72in x 5.91in x 5.91in)