Item Descriptions:

iPad · tablet installed in pipe and pole!

It is an arm for a tablet that can be attached to a pole with a diameter of 20 to 35 mm.

Unlike conventional clamps, adopting a "circular clamp" where the clamping part is curved increases the installation surface with the pole,

Even if it is attached to a round pole it is easy to stabilize.

It corresponds to various tablets

Adopts a steplessly adjustable holder that can hold tablets of various sizes.

It is convenient for installing in a shared space, where tablet use of various models is assumed.

Flexible arm with high degree of freedom

The arm part can be bent freely and can be adjusted to the desired angle and direction.

Lie down and sit ... You can respond flexibly to various situations, so it will be active in various situations.

Since it is a short arm type, it does not become an obstacle compared to a long arm stand.

<Specification>

■ Size:

Holder / W 150 x H 120 - 220 mm

Total arm length: 120 mm

Weight ■: about 230 g

■ Material: ABS etc.

■ Producing countries; China

■ Warranty period: 1 year from purchase date

■ Instruction Manual: Yes

<Supported model>

Compatible models: 10.5 inch iPad Pro, 9.7 inch iPad (2017), iPad Air 2, iPad Air,

iPad (4 th generation), iPad (3 rd generation), iPad 2, iPad, iPad mini 4, mini 3, mini 2, mini, etc.

Tablet PC from 7.9 to 10.1 inches

* When using iPad mini, it is correspondence only of horizontal placement.

It can not be installed in portrait orientation.

【Precautions for use in portrait】

× When installed perpendicular to the ground, the weight of the tablet may cause the equipment to be vertical.

○ It will be stabilized if it is installed in a shape close to horizontal with respect to the ground.

Features:

• Please enter model number Confirm this is compatible:
• It is an arm for a tablet that can be attached to a pole up to 35 mm in diameter.
• Unlike conventional square poles, we adopt a circular clamp with many ground planes pinched along the curve.
• Since it can be installed in the pole, it is suitable for racks and bedside, for gym · fitness, for indoor road bikes, and for installation on posts such as factory racks.
• The width of the holder part is movable, it is possible to install an iPad or a tablet up to about 7 to 10.5 inches.
• To the contact part of the tablet is a protective sheet gently fixing the equipment.
• Since the arm section adopts a flexible arm with high degree of freedom, it can be adjusted to the desired angle, the direction you like.
• The holder part rotates 360 ° (Please check if you can firmly install the tablet so that the tablet does not fall when turning it vertically or horizontally).

Product information:

Shipping Weight: 294 g

Package Dimensions: 5.69 x 18.49 x 27.41 cm