Description: * Anti fog glass，CMOS imaging sensor， high sensitivity and low power consumption.* Support NTSC / PAL video system.* Embedded mounting in rear bumper， snap-in design， it is easy to install.* High-definition and 145 degree wide viewing angle.* Water-proof， shock-proof and anti-jamming functions.* Applicable to variety of vehicles: car， truck， RV， etc.* It helps to avoid incidents and accidents abrasion well.* Its simple and modest design and small size won't draw any attention.* This camera can give you a full sight of the back of your car when you are driving. * Low illumination level， it can work within 3 meters at night and other dark environments.* To protect your car from collision with invisible obstacle. * Perfect solution to get rid of that poor rear view visibility on your car， boat， trailer， camper， truck or any vehicle that has no rear-view mirror or poor rear vision.* Connect to any type of monitor with a composite yellow RCA jack for crystal clear resolution mounted inside will fit into most vehicle key holes， no other installation needed. Specification: TV System: NTSC/PALPower: DC 12V±10%White Balance: AutoSync. System: InternalLength Angle: 145 degreeHorizontal Resolution: 420 TV linesEffective Pixels: 580 * 492Current Consumption: 250mA±10%Image Sensor: CMOS 7959Waterproof: IP68 Installation:1.Mount the camera inside the keyhole of your vehicle.2.Adjust the lens of the camera to its best position.3.Connect power cord to connect to your vehicle DC 12V power system.4.Connect the video output(yellow) of the camera to the display in your vehicle. Package include: 1 x Rear view camera1 x Power supply cable1 x Video cable2 x Screws