PRACTICAL 3-IN-1 DESIGN: The ABN Wire Crimping, Cutting, Stripping Tool - Self-Adjusting, Automatic, Multifunctional Cable Stripper Pliers 10-24 AWG effortlessly strips wire, cuts wire, and crimps solderless connectors/wire and is faster, cleaner, and easier than old fashioned close-and-spin wire strippers; Removes insulation and will not damage the core wire; Insulated comfort handles offer protection and reduce hand exhaustion
STRIP: Ranging from 10 AWG to 24 AWG (0.2mm to 6.0mm)
CUT: Trim wire and cable; Thumb wheel micro-adjusts jaw tension and clearance for perfect cut
CRIMP: Insulated terminals ranging from 10 AWG to 22 AWG (0.5mm to 6.00mm) and non-insulated terminals 10 AWG to 12 AWG (4.0mm to 6.0mm) and 14 AWG to 22 AWG (0.5mm to 2.5mm); Auto ignition terminals 7mm to 9mm
EASY OPERATION: The teeth grab, hold, pull, and remove the outer jacket on a wire with a simple one-handed motion; Simply place your wire between the 2 jaws at the head of the tool, select the desired exposed wire length (1/4-inch to 3/4-inch) using the flip-up red gauge stopper, and squeeze; The jaws clamp down, automatically selecting the right tension to hold the wire without damaging it, and pull insulation away, and the result is a perfectly stripped wire

Technical Details

Product Details

Product Dimensions

Package Dimensions
Width : 4.5 inch
Height : 0.7 inch
Length : 8.6 inch

Item Weight: 6.4 ounce (View shipping rates and policies)
Shipping Weight: 12.8 ounce (View shipping rates and policies)

ASIN : B0176J6DU8

Product Description

Most wire strippers require two hands and time, but the ABN Wire Crimping, Cutting, Stripping Tool - Self-Adjusting, Automatic, Multifunctional Cable Stripper Pliers 10-24 AWG changes this by doing the stripping for you and allowing for one-handed operation. It can strip 10 AWG - 24 AWG wire, cut, and crimp 10 AWG - 22 AWG insulated terminals, 10 AWG - 14 AWG non-insulated terminals, and 7mm - 9mm auto ignition terminals. The tool automatically adjusts tension, but there is an adjuster knob on the stripper that you can tighten or loosen to get the right amount of tension for the gauge of wire if you wish. To use, place wire between the jaws, select an exposed wire length, and squeeze. It is that simple, and the result is a perfectly stripped wire every time.