Operating Voltage: 12V; Control Channel: 2 Channels; Work: jog or self-lock.
Supporting remote control: 50 ~ 100m (Open Place) two-button remote control.
Jog: press one button is ON. Loosen your finger on the same button is OFF.
Self - lock: press one button for one time is ON .press the same button again is OFF.
Inter - lock: press one button is ON, press another button is OFF. (Need one channel switch and 2 buttons remote control)
Color: as shown
Receiver parameters:
Operating voltage: DC12V
Working frequency: 315MHZ
Contact capacity: less than equal 10A/250VAC; 10A/30VDC
Receiver sensitivity: Greater than -105dB
Remote control distance: 50 ~ 100m (open area) (please stretch the antenna in order to achieve effective distance)
Control approach: four normally open (normally closed) contacts
Encoding type: fixed code; pad code
Remote control parameters:
Operating voltage: DC12V (battery included)
Operating Current: less than equal 10mA
Operating frequency: 315MHz
Transmission Distance: 50 ~ 100m (open area) (please stretch the antenna in order to achieve effective distance)
Encoding type: fixed code; pad code
Learning and remove method:
Press the first learning code, the indicator flash, loosen your finger, press first button of the remote control,the indicator flash 2 times and off; press the second learning code, the indicator flash, loosen your finger, press second button of the remote control,the indicator flash 2 times and off it mean you learn it successfully.
Remove/clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully.
Package include:
1 x Receiver Board
1 x Remote Controller (battery included)
Note:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.
