Wattson Pen Conductivity Meter with plastic box CD-310

SPECIFICATIONS

Range: 0 to 999 us/cm

Resolution:1 us/cm

Accuracy : 2%F.S

Environment RH 95% max; 0 ~50

Calibration: 800us/cm solution

ATC: 0 ~50

Batteries: 4 x 1.5V alkaline(LR44)

Life: approx 150 hours of use

Dimensions 152x30x21 mm (5.9x1.2x0.8")

Weight 53 g

OPERATION

? Remove the protective cap.

? Turn the meter on sliding the switch on the top.

? Immerse into solution up to the max immersion level.

? Stir gently and wait until the display stabilizes.

? After use， switch off conductivity meter， use the water clean the electrode and replace the protective cap.

? Large fluctuations in readings could be due to lack of calibration， dry electrode or rundown batteries.

BATTERY REPLACEMENT

When the meter cannot be switched on or the display fades， pull out the battery compartment and replace all four 1.5V batteries， while paying attention to their polarity. Batteries should only be replaced in a safe area using the battery type specified in this instruction manual.

WARRANTY

These instruments are warranted from all defects in material and manufacturing for a period of 1 year from the date of purchase.

If during this period， the repair or the replacement of parts is required where the damage is not due to negligence or erroneous operation by user， please return the parts to either dealer or our offices， and the repair will be effected free of charge.

MANUAL

PACKAGE:

100pcs/carton， 370 X 350 X 330mm. 13kg/carton 

P.S: Any other questions， please feel free to

Call: +86 18815237551 or +86-577 64380708

     Skype: lishao9182  QQ: 386983603