Item Descriptions:

We offer Cree LED and Nichia 219B LED

Tool Ti Cree XP-G2 R5 Specification

LED light: Cree XP-G2 R5 with LED

Battery used: AAA 4 x 1 (not including batteries)

Brightness / lighting time

High: 110 lumens / 30 Minutes

Mid: 32 lumens / 4 hours

Low: 5 Lumens / 36 hours

Light irradiation intensity: 553 CD

Maximum irradiation distance: 47 meters

Tool Ti Nichia 219B Specification

LED light: Cree XP-G2 R5 with LED

Battery used: AAA 4 x 1 (not including batteries)

Brightness / lighting time

High: 80 lumens / 30 Minutes

Mid: 18 lumens / 4 hours

Low: 3 Lumens / 36 hours

Light irradiation intensity: 304 CD

Maximum irradiation distance: 34 meters

Waterproof rating: IPX-8 (2 M)

Impact resistance: 1.5 M

Size: total length of about 74 mm × body diameter approximately 14.4 mm × head diameter approximately 14.4 mm

Weight: Approx 22 g (battery not included)

Riff is OP specification with tempered glass filter coated on both sides AR.

It is perfect for EDC applications.

About LED chip:

The color temperature of the Cree XP-G2 LED adopted for this Tool Ti is 6500 - 7000 K.

The color temperature of the Nichia 219 BT LED is 3900 to 4100 K.

From the Cree LED, Nichia LED's color rendition is more excellent, and you can reproduce the color of the object naturally.

About the tip O ring:

The tip O ring is GITD (light accumulation).

Although the degree of light emission is small, it is never lost sight of the light even in the dark if it is just turned off.

Equipped with patented zero-power-consumption metal tail switch

About the switch:

It adopts an electronic switch (patented) and seems to be flat at first sight, but the surface of the button is lower than the surrounding by 0.2 - 0.3 mm, although it is only a little, there is a sense of stroke (probably 1 mm or less ...)

It feels a click feeling, it is a switch that operates so as to press the switch with [fingertip].

About the clip:

The attached stainless steel clip can be installed in either direction.

This metal ring is made of Brass (brass), exposing a part of the canister to which the LED and the circuit board are mounted from the positional relation, as well as accents (decoration) on the design, but also the heat radiation effect.

【How to operate】

Every time the switch is turned on / off, the mode changes as <Mid> → <Low> → <Hi> ... ... and repeats this loop.

In case

In the installation mode, there is no mode memory function in 3 mode, it will be reset from "Mid" all the time after 3 seconds or longer (※ actual value) elapsed after turning off.

In case

In case

Accessory: Stainless steel clip, preliminary O ring, key chain

Features:

• LED light: Cree XP-G2 R5 LED mounted / used battery: AAA 4 × 1 (not including batteries)
• High: 110 lumens / 30 Minutes Mid: 32 lumens / 4 hours Low: 5 Lumens / 36 hours
• Size: Total Length Approximately 74 mm × Body Diameter 14.4 mm × Head Diameter 14.4 mm Weight: Approx 22 g (without batteries)
• Patented zero-power-consumption Metal electronic tail switch mounted electronic switch (It does not work without electric power in the switch part) So to watch out for the first time use, as soon as you insert the battery
• The switch does not turn on and the LED does not light up.
• After waiting for a few minutes after inserting the battery (at this time, the battery feeds the electronic switch section) it becomes usable.
• Accessory: Key ring, preliminary O ring

Product information:

Shipping Weight: 99 g

Package Dimensions: 3.50 x 7.49 x 8.51 cm