Home Armor Instant Mold & Mildew Stain Remover FG 502 32oz

Removing stubborn mold and mildew stains has never been faster or easier thanks to the powerful bleach-based formula of our Instant Mold & Mildew Stain Remover.  Almost twice as strong as the leading brand, it makes fast work of tough stains: Just spray on, wait 5-10 minutes and rinse stains away.  All with no scrubbing!

Instant Mold & Mildew Stain Remover also improves the performance and appearance of new paint; just use it as a surface prep prior to painting!

Instant Mold & Mildew Stain Remover is ideal on:

Tile
Grout
Tubs
Toilets
Fiberglass
Shower Doors
Vinyl Curtains
Counters
Sinks & more

Directions:

Apply to mildew stains and leave the room while the cleaner is working.  No scrubbing is required.  
Wait 5 to 10 minutes for stains to disappear, then rinse thoroughly with water or wipe with a damp sponge.  
Be sure to rinse the cleaner from vinyl or rubber surfaces within fifteen minutes as it may cause damage.  

NOTE: Contact with clothing, carpet fabric, painted wood surfaces or paper may cause discoloration or damage.  Test on a small inconspicuous area before applying to surface.

FAQs:
Can I use this product outdoors?
Yes. The product works great on both indoor and outdoor surfaces.

Does this product have bleach in it?
Yes, the formula has almost twice the bleach content as compared to competitors. It also has surfactants (detergents) for cleaning.

Can I use this on fabric?
It’s not recommended. This is a bleach product so it will take the color from fabrics.

Can I clean glass with this?
Try to avoid getting on glass as it may etch it if not rinsed off.

Does bleach remove mold?
Yes, bleach removes mold and mildew stains. We also have a product that kills mold and bacteria and viruses. This is a professional version and is called Mold Armor Mold Remover & Disinfectant. 



Home Armor Mildew Stain Remover Plus Blocker FG523 32oz

Home Armor® Mildew Stain Remover Plus Blocker is no ordinary cleaner.  It’s safe, powerful bleach-free formula eliminates mold and mildew stains, soap scum and mineral deposits like calcium and lime.  But, that’s only the beginning.

As it cleans, it leaves behind an invisible shield that works continuously for up to 3 months to protect surfaces and materials from odor or stains caused by moisture. And, its effectiveness is not diminished by washings or rain!

Mildew Stain Remover Plus Blocker can be used indoors and out on:

Counters & Sinks
Shower Curtains
Tubs & Toilets
Doors, Walls & Ceilings
Aluminum
Glass
Fiberglass
Stone (except natural marble)
Cultured marble
Acrylic PVC
Vinyl
Porcelain
Rubber
Chrome
Formica & More

Directions:

Shake well.  
For initial application, spray sparingly on tile, tub, shower door, shower curtain or any surface to be cleaned starting at the highest point and working down.  
Allow to work 5 minutes before rinsing or wiping with cloth or wet sponge.  
To remove tough mildew stains use a brush.  
Severe stains may require additional treatment.
 Allow to dry then spray a fine mist on all surfaces without rinsing.  

For future applications: A spray mist application every 1 to 2 months without scrubbing or rinsing will build up an invisible shield to prevent mildew and mold staining!

NOTE: DO NOT APPLY TO NATURAL MARBLE

FAQs:
Is this a bleach product?
No, this is not a bleach product because it has a mold blocker in it which will not mix with bleach.

What is a Mold Blocker?
An invisible barrier left on the surface. As long as the barrier stays in place it will work. Rain and rinsing typically will not remove the barrier.

Will this remove my mold stains?
Yes, apply to the area and scrub with a brush. The barrier left behind will make the clean last longer.

Can I use this in my shower?
Yes, this will clean your shower and leave a barrier behind to help inhibit the growth of mold.

Home Armor Mold Blocker FG516 32oz 

When you clean mold and mildew, you can make the clean last longer with Mold Armor® Mold Blocker.
Mold Armor® Mold Blocker provides protection from mold and mildew staining when properly applied.  Mold Armor® Mold Blocker establishes a barrier between most household non-porous surfaces and bacteria and mold and mildew that cause odor, staining, and discoloration.  It's a water-resistant anti-microbial and odor-free product that provides protection indoors and out.

It works continuously for up to 3 months!  Use it indoors and out – its effectiveness can’t be diminished by repeated washings or rain.  

It’s ideal for use on:

Glazed Tiles
Grout
Shower Curtains
Tubs
Garbage Cans
Deck Furniture
Bedding
Apparel
Upholstery
Carpets
Vinyl

Directions:

Bathroom and Non-Food Contact Kitchen Surfaces: Tubs, glazed tiles, vanity tops, shower curtains, shower stalls (areas), sinks, washable walls, wallpaper for non-food contact, floors, window sills, cabinets, garbage cans, exteriors of appliances, refrigerator exteriors, fiberglass, Formica, glazed porcelain, synthetic marble, plastic vinyl.

SPRAY: Shake well. Using trigger pump sprayer, spray entire surface area 4”- 6” from the surface making sure the surface is completely covered. Let stand until dry or let stand for 3 minutes and wipe dry with clean cloth or sponge. If spotting occurs, wipe with moist cloth or sponge. If necessary, reapply every three months or when odor, staining, and discoloration due to bacteria, mold stains, or mildew stains return.

Linens, Draperies, Fabric and Apparel: Bed sheets, blankets, bedspreads, curtains, draperies (washable only), underwear, socks, intimate apparel, hosiery, throw rugs, toweling, toilet tank covers, shower curtains, shoe insoles, outerwear apparel (jackets, sweaters, sweatshirts, coats, raincoats, overcoats, jerseys, ponchos), and fabrics made out of acetates, acrylics, cotton, fiberglass, linen, Lycra, nylon, orlon, polyester, polyethylene, polypropylene, rayon, silk, spandex, vinyl, and wool.

SPRAY: Clean surface prior to application. Shake well. Using trigger pump sprayer, spray entire surface area 4”- 6” from the surface making sure the surface is completely covered. Let stand until dry or let stand for 3 minutes and wipe dry with clean cloth or sponge. If spotting occurs, wipe with moist cloth or sponge. Test for staining and color-fastness of fabric by treating and drying a small, concealed area prior to application. If necessary, reapply every three months or when odor, staining, and discoloration due to bacteria, mold stains, or mildew stains return.

Air filters and filter material for furnaces, air conditioners, air purification systems, automobiles, recirculating air handling systems and vacuum cleaner filters:

SPRAY: When treating filters, remove filter from unit. Shake well. Using trigger pump sprayer, spray entire surface area 4”- 6” from the surface making sure the surface is completely covered. Let stand until dry. If spotting occurs, wipe with moist cloth or sponge. If necessary, reapply every three months or when odor, staining, and discoloration due to bacteria, mold stains, or mildew stains return.

Carpet: SPRAY: Apply to clean carpet. Shake well. Using trigger pump sprayer, spray entire surface area 4”- 6” from the surface making sure the surface is completely covered. For rotary jet extraction cleaners and carpet steamers, add product directly to cleaning tank, then operate the equipment in accordance with manufacturer’s instructions. Apply and then let stand until dry. If spotting occurs, wipe with moist cloth or sponge. Test for staining and color-fastness of fabric by treating and drying a small, concealed area prior to application. Mold Blocker treats approximately 200 sq. feet per gallon. When treating coarser substrates (e.g., wool carpeting), more Mold Blocker may be required due to absorption. Dry carpet areas and surfaces before re-entry. A fan may be used to assist in drying carpeting. Remove children and pets from treated area until completely dried. If necessary, reapply every three months or when odor, staining, and discoloration due to bacteria, mold stains, or mildew stains return.

Bedding, Upholstery/Furniture:
Mattress pad and mattress ticking and upholstery composed of acetates, acrylics, cotton, fiberglass, nylon, polyethylene, polyolefin, polypropylene, rayon, silk, spandex, vinyl, wool, and fiberfill to be used in upholstery, sleeping bags, apparel where the fiber is cotton, natural down, nylon, rayon, or wool.

SPRAY: Clean surface prior to application. Shake well. Using trigger pump sprayer, spray entire surface area 4”-6” from the surface making sure the surface is completely covered. Let stand until dry. If spotting occurs, wipe with moist cloth or sponge. Test for staining and color-fastness of fabric by treating and drying a small, concealed area prior to application. When applying to mattress pads and ticking do not soak. Remove children and pets from treated area until completely dried. If necessary, reapply every three months or when odor, staining, and discoloration due to bacteria, mold stains, or mildew stains return.

STORAGE AND HANDLING: Non-refillable container. Do not reuse this container. Offer for recycling, if available.

FAQs:
Will this kill mold?
No, this is a blocker that helps prevent the growth of mold.

How long will the blocker last?
Up to three months, and won’t wash off with rain or washings.

Does this product have bleach in it?
No.

Will the Mold Blocker work on fabrics?
Yes, read the back label for directions on what types of fabrics to use it on. Test on an inconspicuous area of the fabric first to be sure it will not harm it.