Descriptions

The relay module is a digital switch to control much higher voltages and currents which are out of the abilities of your Arduino or microcontroller. Whenever switching a device with high voltage or draw high current, a relay will be needed.

When a logic input is given, the relay will switch to allow current to flow or cut-off dependent on the wiring. A relay usually consist of a coil, 1 common terminal, 1 normally closed terminal and one normally open terminal. The common terminal and the normally open terminal will be connected when the coil is energized.  The VCC and JD-VCC need to be connected with jumper when using this module.

 

Technical details

-          Operating voltage of 5V

-          Capable of conducting 250VAC@10A or 30VDC@10A.

-          On-board LED to indicate power status

-          Connect JD-VCC and VCC with jumper



Shipping (within 1-3 working days):

Peninsular                          - RM7
Sarawak, Sabah & Labuan  - RM10
Cash on delievery               - RM0 (Bayan Lepas only)

# For any product enquiries and technical consultation on Arduino coding, please contact us at sainapse.io@gmail.com or SMS/Whatsapp at +60163930332.