[Baby Material]: OPVC colorless and transparent body (polyurethane)
[Transparency]: translucent
[Baby Size: 10 cm wide， 15 cm wide， 1 meter long (the length can be cut as needed)
[Instructions]
At present， a lot of cars are light colored door trim， in and out of the car， will inevitably encounter shoe rubs or other hard object， most likely to rub dirty or scratched. Leaving unsightly dirt or scratches group. Previously， many owners are upset at these places wipe clean plastic， due to the accumulation of year after year， no matter how clean looks are dark， and the car did not match other locations.
This product uses high-tech polyurethane film made texture (commonly known as rhino skin) production， with rhino skin like super toughness， it protects all parts of the interior plastic plate， with excellent material ductility， transparency and surface adaptability . There are stickers on the back， attached to the interior door panels. Installed after the dirty just gently touch can clean as new.
Always make sure before pasting bits thorough cleaning paste， stick Please try after some time in order to ensure a firm press， do not wash within 12 hours.
In order to make the position more accurately and paste the proposals before pasting the product soak in water or alcohol for a period of time and then paste between the product and the paint will have a water film， easy to move to the exact position and completely get rid of air bubbles.
If you do not look carefully not to go out is to look at the wrist posted very practical things ~
Door trim posted rhinoceros skin， effectively prevent access to the interior of shoes rub dirty car。
Also posted here， you can see it？
From another angle
This is a picture easier to see.
Lets keep the car clean， prevent scratching， is not it worth it? In fact， in addition to the car's door handle and the door edge， mirrors， bumpers and other places can be affixed rhinoceros skin， mainly based on the owner's needs may be.
Foil process diagram showing the door: Example one
1.First， the protective film much better than the site needs to be stuck with
2.The need to paste the site clean， and make sure that no impurities or wax or something
3. Sprinkle fine (also available in place of water) to the surface of the wet
4.End of paper torn off， the film posted a good
5.With a scraper to alcohol (or water) scrapings， can be replaced with a bank card or membership card to no avail
6. Trim the excess part of the corners practice case two: DIY rearview mirror affixed to the car， "rhino skin" process
7. roasted gun bake flat corners， while good and you're done with a scraper scraping ~~ (grilled gun can be used instead of a hair dryer)
Example 2:
Clean finish pre-construction。
The good-sized rhino skin cut and paste on the bit
Used as a tool for scraping pressure foil rhino skin， making it fit perfectly flat
The excess part of the crop
