There is no reason to stick to genuine strobe, high-function strobe.

I purchased it from the shop called Emgreat. As a conclusion, it is a very satisfactory product, and correspondence of shop is also recommended kindly not to think in Japan's genuine manufacturer, it is recommended more than expected. Although we also use HVL-F60M and HVL-F43M of us SONY, there is no genuine and conspicuous error in TTL control, you can use it just like genuine once you get used to it. The auto power zoom mechanism that the TTL dimming, manual lighting, multi light emission, and HSS are supported, the light emitting surface is zoomed in conjunction with the focal length of the lens, and the indicator showing the distance the light reaches depending on the exposure situation is also the top There is no dissatisfaction at all as equipped with the model type. And more than anything, by combining with X1T, TTL wireless dimming is also possible and the reachable distance is longer than the original Sony genuine wireless controller (genuine is 30 meters, but GODOX is nominally 100 m. Actually, as long as you tried it at 50 m it will work ), It is very easy to use. I used TT685s and HVL-F60M in outdoor parade shooting, and when overheating I switched it alternately, but with WB variability, GN was also almost equal to genuine F60M. Because Sony's flagship strobe will cost about 5,500 yen, if it is enough for TT 685s, you will receive a culture shock. Anyway, with the budget to buy one F60M, you can buy three TT685s .... I think that having one genuine strobe is a good choice for one. Because genuine is a benchmark for TTL control. However, if you are familiar with the genuine strobe, there are cases where you will use the second one, and those who are willing to buy two F60M budgetly will find that GODOX's choice of TT 685s is totally problematic I will. By the way, since you can wirelessly control both X1T - C and X1T - N, you can control the combination of wireless controller and strobe with mixed manufacturers for both Nikon, Canon, and Sony as long as they are between GODOX In case of makers with different strobes, dimming is only manual control.) Functional terms are also sufficiently superior choices. =========================================================== =========================================================== =========================================================== =============== It is the second review post (It was the situation we used for 6 months at the time of the first posting) We purchased TT685s and used it for about half a year, hot The shoe (multi interface shoe) was damaged by misuse usage. As I contacted the seller (Emgreat-sama), I was sorry to have sent replacement parts, so I'm thinking I will describe it in detail in the review as it is a good response. We hope for your reference. Sony's multi-interface shoe is made of plastic, not metal, unlike other companies' hot shoes. Therefore, if you make a mistake in handling, it is easy to break, the contacts are out of position, making communication with the camera impossible. I accidentally clamped this multi-interface shoe with a screw from the side to the hot shoe bracket that fixes in a form that holds the hot shoe in the form, and it is damaged (it is a natural result though it is a natural result) and it becomes deformation and connection failure in this manner (Photo ①) I thought about giving up halfway and buying a new item of TT 685s, but when I contacted the seller, "Answer parts will be sent" Answer ... !! As early as 3 days after contacting, small parts arrived with careful packing at international flights (Photo 2) Why is China ⇒ Japan sooner than domestic postal matter !!! The contents are such small things (photo ③) Although I was going to prepare for shipping cost, it is a little unfortunately for a very kind correspondence that no parts cost carriage is burdened. This part is repaired by the method of exchanging the whole bottom of the main body. First loosen the four screws on the main unit and remove it (Photo ④) When you open the inside, the connecting connector of the part to be replaced is connected to the base (Photo ⑤) Since the connector has no soldering etc., Pull it out with caution. Then, connect the connector of the new part like a photo as carefully not to twist and finish it with four screws as it was restored. If you know the internal situation you can do it with a single driver. It is OK if it can be set in the camera and it can be confirmed that it can communicate normally (Photo ⑥) It is a big merit that the structure is simple and easy to disassemble like this. Even for Sony genuine HVL-F60M, it seems that the structure looks the same as it is fixed with 4 screws, but it is impossible for the user to procure the parts directly from the manufacturer, and since the price is price I do not feel like disassembling (^ ^;) Emgreat's shop response and special correspondence in parts of GODOX were impressive with the mobility not found in Japanese manufacturers. ※ Because the strobe is a mechanism to store large current in the capacitor, please be careful of the electric shock by disassembly. Basically, disassembly should not be done without permission from the manufacturer. Be sure to obtain the parts from the shop, after accepting the manufacturer, be sure to unpack the batteries before disassembling.

We can not assume the responsibility even if it occurs in the emergency accident as a result of disassembly by seeing this review.

I purchased it from the shop called Emgreat. As a conclusion, it is a very satisfactory product, and correspondence of shop is also recommended kindly not to think in Japan's genuine manufacturer, it is recommended more than expected. Although we also use HVL-F60M and HVL-F43M of us SONY, there is no genuine and conspicuous error in TTL control, you can use it just like genuine once you get used to it. The auto power zoom mechanism that the TTL dimming, manual lighting, multi light emission, and HSS are supported, the light emitting surface is zoomed in conjunction with the focal length of the lens, and the indicator showing the distance the light reaches depending on the exposure situation is also the top There is no dissatisfaction at all as equipped with the model type. And more than anything, by combining with X1T, TTL wireless dimming is also possible and the reachable distance is longer than the original Sony genuine wireless controller (genuine is 30 meters, but GODOX is nominally 100 m. Actually, as long as you tried it at 50 m it will work ), It is very easy to use. I used TT685s and HVL-F60M in outdoor parade shooting, and when overheating I switched it alternately, but with WB variability, GN was also almost equal to genuine F60M. Because Sony's flagship strobe will cost about 5,500 yen, if it is enough for TT 685s, you will receive a culture shock. Anyway, with the budget to buy one F60M, you can buy three TT685s .... I think that having one genuine strobe is a good choice for one. Because genuine is a benchmark for TTL control. However, if you are familiar with the genuine strobe, there are cases where you will use the second one, and those who are willing to buy two F60M budgetly will find that GODOX's choice of TT 685s is totally problematic I will. By the way, since you can wirelessly control both X1T - C and X1T - N, you can control the combination of wireless controller and strobe with mixed manufacturers for both Nikon, Canon, and Sony as long as they are between GODOX In case of makers with different strobes, dimming is only manual control.) Functional terms are also sufficiently superior choices. =========================================================== =========================================================== =========================================================== =============== It is the second review post (It was the situation we used for 6 months at the time of the first posting) We purchased TT685s and used it for about half a year, hot The shoe (multi interface shoe) was damaged by misuse usage. As I contacted the seller (Emgreat-sama), I was sorry to have sent replacement parts, so I'm thinking I will describe it in detail in the review as it is a good response. We hope for your reference. Sony's multi-interface shoe is made of plastic, not metal, unlike other companies' hot shoes. Therefore, if you make a mistake in handling, it is easy to break, the contacts are out of position, making communication with the camera impossible. I accidentally clamped this multi-interface shoe with a screw from the side to the hot shoe bracket that fixes in a form that holds the hot shoe in the form, and it is damaged (it is a natural result though it is a natural result) and it becomes deformation and connection failure in this manner (Photo ①) I thought about giving up halfway and buying a new item of TT 685s, but when I contacted the seller, "Answer parts will be sent" Answer ... !! As early as 3 days after contacting, small parts arrived with careful packing at international flights (Photo 2) Why is China ⇒ Japan sooner than domestic postal matter !!! The contents are such small things (photo ③) Although I was going to prepare for shipping cost, it is a little unfortunately for a very kind correspondence that no parts cost carriage is burdened. This part is repaired by the method of exchanging the whole bottom of the main body. First loosen the four screws on the main unit and remove it (Photo ④) When you open the inside, the connecting connector of the part to be replaced is connected to the base (Photo ⑤) Since the connector has no soldering etc., Pull it out with caution. Then, connect the connector of the new part like a photo as carefully not to twist and finish it with four screws as it was restored. If you know the internal situation you can do it with a single driver. It is OK if it can be set in the camera and it can be confirmed that it can communicate normally (Photo ⑥) It is a big merit that the structure is simple and easy to disassemble like this. Even for Sony genuine HVL-F60M, it seems that the structure looks the same as it is fixed with 4 screws, but it is impossible for the user to procure the parts directly from the manufacturer, and since the price is price I do not feel like disassembling (^ ^;) Emgreat's shop response and special correspondence in parts of GODOX were impressive with the mobility not found in Japanese manufacturers. ※ Because the strobe is a mechanism to store large current in the capacitor, please be careful of the electric shock by disassembly. Basically, disassembly should not be done without permission from the manufacturer. Be sure to obtain the parts from the shop, after accepting the manufacturer, be sure to unpack the batteries before disassembling. To the last, please take responsibility at your own risk.