Item Descriptions:

Embrace everything

It protects the entire surface from the surface to the edge of the iPhone X, it is harder to float than ordinary film at the time of pasting, and troubles of floating on the periphery are solved.

From the frame on the outside, the protection power increases up to the edge called weakness of the glass film, it becomes harder to split further.

I embrace and protect the entire iPhone X of you

2.5D round edge processing

By the accurate round edge processing of the edges of the tempered glass film, there was no feeling of getting caught and the impact from the side was relieved and a pleasant smooth texture was realized.

Japan Material Asahi Glass + 5 times strengthening process

With three mechanisms, the general iPhone X glass film has more than 5 times the protection power, high quality material to ease shock and minimize damage to the screen.

Industry's highest hardness 9H

Surface hardness is 9H and it is very hard.

Prevent scratches and thoroughly protect the iPhone X LCD screen.

Super clear, smooth operation

High transparency, high light transmittance, low reflection.

You can play the wonderful screen of iPhone X as it is with clear view so as not to feel the presence of the film itself.

It does not interfere with the sensor

iPhoneX specific function Protect the sensor that realizes the face ID, without interfering.

Perfect fit

A clean set of instructions, alcohol pads, microfiber cloth etc is attached.

If you follow the instructions, you can stick it perfectly.

※ Please see the following notes before placing the film.

Question ①:

How do I prevent dust from being mixed in when pasting a film?

Cause:

If dust is suspended in the air, or dirt, fingerprints etc on the liquid crystal screen can not be wiped cleanly, dust easily enters.

Correct operation method:

Please clean the dirt and dust of the liquid crystal screen thoroughly using alcohol pad and micro fiber cross, and dust removal seal before pasting the film.

To prevent dust from sticking off, please peel off the protective film when you peel off the side of the liquid crystal to the film sticking side.

Question ②:

How can you avoid bubbles, floats, etc?

Cause:

When sticking the film, bubbles will be generated when it is distorted, dust enters, or the pushing force is not uniform.

Correct operation method:

When aligning the position of the liquid crystal screen and pressing it with your fingers, you can stick it cleanly with a single shot, but if bubbles or floating gets out a little, wrap the spatula or cloth for bleeding out with a finger and push it out little by little to remove bubbles

I can do it.

If the bubble still can not be pushed out, you can peel off the glass film in a panic, if you turn from the edge you can repack it.

Question ③:

Crack when reapplying it?

Aerated?

Is the edge floating?

Cause:

Since the material of the film is glass, there is a possibility that things such as cracks, bubble inclusion, and edges are floating due to imbalance in peeling and sticking forces, or when the nails touch the adhesive surface when flipping.

Correct operation method:

When repositioning, it is a point to peel off the whole film rather than peeling off some films.

Please carefully do not touch the adhesion side of the film when peeling to avoid floating by repositioning.

Features:

• Please enter model number Confirm this is compatible:
• ♢ 【Ideal for X full screen screen】 It is a tempered glass film designed to cover the curved edge of the screen so as not to disturb the attractiveness of the full screen.
• Since edges are less likely to rise compared with film usually and it closely adheres to the curved edge, there is a possibility of interference depending on the case to be used.
• When purchasing, we will consider including compatibility with the case.
• ♢ [Protective power 5 times UP] Used in Asahi Glass Made in Japan.
• "Impact resistance to withstand iron ball drop test from 70 cm high": Three structures of toughening layer to disperse impact force, glass layer to absorb impact force, round edge to relieve impact from side.
• It has more than 5 times protection power compared with general products, it minimizes damage to the screen and is hard to crack even if it receives a shock.
• "Excellent scratch resistance": A film with a hardness of 9 H is protected from daily scratches, making scratches difficult.
• ♢ 【Smooth operability & easy maintenance】 High transparency, high light transmittance, low reflection.
• With surface oil coating processing, the touch is good, excellent in water repellency, fingerprints and dirt can be easily wiped off.
• It also supports 3D touch, you can enjoy video watching · games more smoothly by smooth operation.
• ♢ 【Attachment kit included】 Instruction manual, alcohol pad, microfiber cloth, dust removal sticker included.
• Advice: As stated in the instruction manual, it is more difficult for air bubbles to be placed after removing the dust.
• Putting the screen on and on is more accurate.
• ♢ [Customer Satisfaction Guarantee · After-Sales Service] With customer satisfaction guarantee, please contact us if there are cracks, scratches, etc. after arrival at the item at hand, or bubbles in normal use and break within a certain period.
• After confirming the situation, we will respond free of charge or refund.
• Please do not hesitate to contact anything concerning the product.
• We will support you until you are satisfied.

Product information:

Shipping Weight: 81 g

Package Dimensions: 1.70 x 8.89 x 16.89 cm