It is best to make rectangular ice of this size easily

It is made of thick silicon. As it is a bit lumpy, please make sure to put it in a flat place when putting water into the freezer. Also, since silicon is thick, it is strong but it took about 12 hours to squeeze the size of the ice together. If possible, the ice transparency will rise if you use a hot water cooler which boils tap water as it is, without boiling water. When Ice is put out a little hinting (It is hard to put out the middle ...) "Since it is made of silicone, it will not get hard even if it gets cold, you can easily pull out the ice from the back by putting water and not melting it" Although it is, it is easier to take water after melting with water, I think whether silicon will also be damaged. There was a review that smells are worrisome but the product I bought was not such a thing. ※ 2017/2/1 Is purchase improved?

The bottom will be chamfered

I expected a regular cube, but the bottom is chamfered slightly diagonally. It is hard to understand this in the image, and it is not written that it is not chamfered in the first place, and it is not a minus element because it is easier for people who are chamfering as "pull out" of ice. Personally, I wanted to pull out "regular cube", so please be careful if you want to remove "dice without chamfer" as well. And overall it's pretty soft. If you do not use it properly in a flat place it will be quite distorted. There was no rubber odor at all.

Low temperature burn attention!

Purchase this because the amount of ice that can be made with an ice making dish originally in the fridge was small. For the time being, I will pour the water all the time, trying to take out the finish, but it will not come out quite well. . . I think that it will be broken the first time, the power does not enter easily. After the second time I forget such a thing and do it with power skill (^ _ ^;) Although it is an own current, the amount of water is different in the square eyes. The middle four are easy to take out, so the amount of water is rather large. The left two and the right two are very hard to remove, so the amount of water is small. I am making it like this. Trying to take out the ice, you need to be careful because it will cause serious burns at low temperature (^ _ ^;)

Ice may be large

Although it may be large and square, but it is a silicone odor and difficult to remove because it is silicon, it is another review that it is easy to take out, but there is not such a thing at all. Although plastic can be taken out at once in a twist, this is rather troublesome since it will not come out unless you can put in force one by one. It is creepy that there are many reviews that do not mention that ... hey? I'm reviewing too many reviews LOL

It is hard to melt, the ice cubes alone!

Because it is hard to remove, it lowered the star one by one ... (lol), the size of the ice, it is hard to melt and the shape is big and complicated, but if you do not take it like pushing out one by one (a little time Because it does not come out), I prepare a plate and need a fight for a while for a while ... (haha) But it is a product that is satisfying with the quality more than I thought!

Large ice makes it easy

I was making round ice for whiskey, but I gave up because of troublesome and low success rate. I do not have to be round, so I thought that I should make big ice, I purchased it. It was written in the instruction manual after first dying in hot water and drying it. I tried but it was not much troublesome. Ice is spilling enough when putting it in the freezer well & it is difficult to remove it considerably, so I am about 8 to 9 minutes. It pushes out from the back and takes it, but I need strength. Especially the edge is hard to pick up. However, it is not too much trouble if it is compared with a round ice. It is handy because it makes it relatively easy to make ice that is large and hard to dissolve.

take time

Because it is big, it is an old freezer that is hard to freeze, so even after 8 hours it was not frozen by a third. It is easier to take out than a plastic thing but needs strength. As shown in the picture, it does not become a square and the upper four corners are excited and the lower four sides are rounded. Although it was different from the image, it is for water bottle so there is no problem if it is not made too large.