Specification / Size:  -------

.  
Reduce false positives; determine noise or fault signals in the cable positioning
breakthrough simulation type signaling
● quickly locate cable fault location
● exclude the bundled cable between signal interference factors, accurate identification of cable pairs
● twisted-pair installation through visual wiring diagram of the end-to-end authentication (open circuit, short circuit and reverse polarity)
● MT-8 audio technology to identify independent line of
● In a noisy environment easily explained through headphones and LED signal indicator signal

● positioning: through radiation measurements positioning distance is slightly far some cable
● isolation: isolation minimal radiation measurements the bundle of cables in a cable
● Verification: automatic signal switching operation between the cable conductor to verify connectivity cable conductor
Positioned a certain distance range of concealed cable positioning cables are the most difficult, but also the most time-consuming work identified in the wall, ceiling or toward the cable in the wiring closet. Check cable tester with the positional audio launch signal, so you can quickly locate the hidden and difficult to find the cable within a certain distance
Quickly identify the correct cable
        Cloth fitted dark line lookup can play audio transmit and receive functions completely original traditional way of positioning is more difficult, you can quickly find alignments using MT-8, the audio generator using twisted pair to send the audio signal to reduce cable mutual interference between.The audio probe by the tone can be clearly identified, so that you can quickly find the cable you need in a bunch of cables or patch panel. The MTI-8 the check line instrument can greatly reduce the finishing time of confusion cables - because you can quickly and easily find the cable.
Verify that the cable connectivity
    MT-8 check line instrument powerful diagnostic capabilities, inspection work to reduce cable movement and change. The product has the common fault in the identification of the twisted pair. LED light clearly pointed out that the wiring fault.
Port Adapter
Direct adaptation in the hunt, if the subscriber line end for the RJ-11 connector, you can direct the transmitter plug into the RJ-11 socket. On line, if the subscriber line end is the RJ-11 or RJ-45 plug, you can directly plug into the transmitter RJ-45 jack on.
Purchase the equipment through the adapter cable access random with a port adapter cable for the connection of the equipment and the subscriber line match.
◆ alligator clip adapter cord
Alligator clip adapter cord transmitter or receiver socket RJ-11 or RJ-45 jack on line subscriber line connection.
◆ RJ-45 adapter cable to the RJ-45 adapter cable RJ-45 jack on the transmitter or receiver and on the subscriber line 8-core RJ-45 computer network socket connected.