How to use your Aspire DBC:

1. To fill、 turn the tank upside down andremove the threaded end cap. Fill the outer portion of the tank(avoidgetting eliquid into

   the center airflow tube)and then screwthe end cap back onto the tank tightly. You can now turn it right side up and check for

   leaks before using.

2. Gurgling or Leaking can  occur if liquidgets into the center airflow  tube. To clear this liquid and improve  performance remove

   the  tank from the battery and blow through  the  mouthpiece into a paper towel.The excess  liquid  will  come out of the thread

   end of the device.If this happens often you may need to check all connections screwed down tightly or replacethe head and wick

   assembly with a new one.

3. The head and wick assembly will sometimesloosen itself when the threaed end cap is unscrewed. Always check that itis pushed

   into the bottom cap tightly tightly before screwing the cap back on.Not doing so could result in a leaking or non-working device.

4. You never run the tank completelydry. Doing could result in a burnt  damaged wick and can causeleaking. Refill the tank when the

   liquid level reaches approximately1/3 full.

5. The lifespan of replacement heads can varyquite a bit、 but following the above instructions will maximize the lifespan ofthe coil.

Specification

1.Size: H74.8 Φ14.5
2.Capacity: 3ml
3.Available Resistance:

1) 1.6Ω (3.0~4.2V)
2) 1.8Ω (3.0~5.0V)
3) 2.1Ω (3.0~6.0V)
4.Available Colors:stainless、black、red、pink、yellow、blue、green、purple.

Product details: