Adjustable Potentiometer Volume Control Knob Switch Rotary Angle Sensor Module For Arduino
Description:
Rotary Angle Sensor is based on the 10k the adjustable potentiometer knob Angle sensor module， the output is 0 ~ VCC simulation values， the output voltage will be as the potentiometer rotation Angle and linear changes. Apply to 3.3 V and 5 V of the SCM system， and the arduino board are compatible. Especially suitable for the volume regulator， such as lighting regulator DIY project
Feature:
Easy to useElectronic building blocks InterfacePower supply is 3 ~ 5.5VDC4 M2 screw positioning holes for easy installation
Parameter:
Item Minimum Typical Value Maximum Unit VCC 3 5 5.5 V VOUT 0 N\/A VCC V Rotation Angle 0 N\/A 280 Deg Size 24 x 29 x 27 mm Weight 8 g
Interface:
Control Interface: GND to ground， VCC power supply， SIG is the signal output pin.Knob Potentiometer: 10K ohm linear adjustable potentiometer， add aluminum knob cap.Positioning holes: 4 M2 screws positioning holes with a diameter of 2.2mm， easy to install， implement the module combinations.
http:\/\/img.banggood.com\/file\/products\/20141126005847Rotary%20Angle%20Sensor%20Schematic.pdf
Package included:
1 x Rotary Angle Sensor