Face to face copy the functions of your original remote by this 4-channel RF remote control duplicator with code learning functions and you'll always have a back up. Duplicate Your Existing Remote Controllers:
<br />Vehicle central locking systems
<br />Garage doors
<br />Electronic gates
<br />Electrical appliances
<br />Car sunroofs
<br />Heating systems
<br />
<br />Easy to install and use, the 4 channels remote control system lets you take control of your gadgets, car and home or garage. The Clone Remote can be work with the following remote control IC modules (please check your original remote control before ordering), and your remotes also should be Fixed code or Learning code, PT2262 PT2264 PT2260 PT2240 EV1527 FP527 FP1527 SC2262 SC2260 LX2260 etc.
<br />Don't copy the IC modules: HCS301,300, and rolling code.
<br />
<br />SKU: A680
<br />Item Description
<br />Specifications:
<br /> 100% brand new and High quality
<br /> Frequency: 433MHZ
<br /> Material: PVC.
<br /> Button: 4 buttons
<br /> Size: 60mm x 40mm x 12mm
<br /> Operating voltage: DC12V (27A/12V battery)
<br /> Operating Current: 12mA@12V
<br /> Transmitting power: 10mw@12V
<br /> Modulation mode: ASK (AM).
<br /> Encoding type: Learning.
<br /> Transfers distance: 80m  (100-200m to the max for open spaces)
<br /> 
<br />Methods of operation
<br />1, Clear out code:
<br />--Press Lock key and unlock key at the same time. (    press these 2 button until the led flashes and it would clear the signals. )
<br />--2 seconds later, LED flashes 3 times, then followed by a continuous fast blinking.
<br />--It Indicates that the remote control code stored was deleted.
<br />
<br />2, Duplicating (learning)
<br />--Left Hands handing the original remote control,  right hand handling the duplicating remote control; 2 remote controls put together as close as possible,
<br />--press the lock buttons of the 2 remote controls at the same time;  Led flash 3 times after 3 seconds, following a fast flashing. It indicates that the original control of the lock key code has been copied into the duplicating remote control.
<br />--The other 3 buttons are off the same operation. 
<br />--Please move the remotes slightly when copying, to make them fully copied.
<br />
<br />3, Resume/Recovery code:
<br />If you clear code of duplicating remote control incautiously, you can press start key and mute key at the same time, led light flash 3 times, then flash fast. It shows the code of duplicating remote control is resumed.
<br />Important Note: The remote control does not include battery because of the strict customs inspection. Please prepare a "23A 12V" battery for it. We appreciate your understanding and support.
<br />Package Includes                
<br /> 1x wireless clone/copy  RF Remote Control