V1NF G3/4 Water Flow Sensor Switch Hall Effect Flow Meter Counter 1-60L/min

100% Brand new and high quality

The water flow sensor is applied for water heater, imprinter, automatic water machine, and other flow metering equipment.

Portable size and light weight, easy to install

With stainless steel ball inside of the impeller, wear-proof

Up and down structure stress applied for the seal ring, avoid to leak

Imported Hall element, adopt pouring sealant encapsulation to avoid to leak and age

Note:

When magnetic material is close with the sensor, its characteristics may vary.

In order to avoid particle debris, the sensor must be installed after a filter.

The flow sensor installation has to avoid strong vibration and shaking of the environment, so as not to affect the sensor\'s measurement accuracy.

Technical Parameters
External threads	3/4 inch
Minimum rated working voltage	DC4.5 5V-24V
Maximum working current	15 mA（DC 5V）
Working voltage range	DC 5～18 V
Load capacity	≤10 mA（DC 5V）
Operating temperature range	≤80℃
Operating humidity range	35%～90%RH (no frost)
Flow Range	1-60L/min
Allow compression	Water pressure 1.20Mpa below
Storage Temperature	-25～+ 80℃
Storage Humidity	25%～95%RH
Output pulse high level	>DC 4.5 V(Input Voltage DC 5V)
Output pulse low level
Output pulse duty ratio	50±10%
Output Rise Time	0.04μS
Output Fall Time	0.18μS
Frequency	F=5.5 * Q (L / Min) error: ± 2%
Dimension	Approx. 6.5 x 4cm (L*W)
Cable Length	Approx. 15cm
Color	Black

1 x Flow Meter  Sensor