IMAX B6 is the new intelligent multifunction charger which can charge and discharge for Lion, LiPo, LiFe (A123), Pb, NiCd and NiMH batteries. It's all-powerful in a way.

1. Microprocessor controlled Delta-peak sensitivity.

2. Individual cell balancing Li-ion, LiPo and LiFe capable Ni-Cd and NiMH capable

3. Large range of charge currents Store function, allows safe storage current

4. Time limit function

5. Input voltage monitoring. (Protects car batteries at the field)

6. Data storage (Store up to 5 packs in memory)

7. Battery break in and cycling.

8. Support new generation A123 system (LiFe) battery

9. Capacity limit, processing time limit, tempreture limit, input power monitor

10. High-power and high-performance circuit

11. Maximum safety

12. Delta-peak sensitivity

13. Monitoring the voltage of individual cell

Specification: 

Operating voltage range: For DC11.0-18.0 Volt / AC to For DC adaptor(For DC11.0-18.0V/5A)

Circuit power: Max.charge power 50W / Max.discharge power 5W Charge Current Range: .1~5.0A

Discharge current range: 0.1-1.0A

Current drain for balancing Li-po: 300mAH/cell

LiIon/LiPo/LiFe cells : 1-6

NiCd/NiMH cells : 1-15

Pb battery voltage: 2~20v

Net Weight: 277g

Dimensions: 133x87x33mm

Compare to iMAX B5:

Can charge 6 cells LiPo battery (B5 can charge maximum 5 cells)

With Discharge Function

A123 Life Charging

1 x imax B6 LiPo battery balance charger

1 x Multi-fuctional extension wire

1 x Universal crocodile clip

1 x JST plug

1 x Receiver plug

1 x English Manual

AC adapter or power supply is not included

Never use the charger unsupervised!

Read the entire operating manual before using this charger

This unit will emit heat during discharging process

Operate the charger in well cooling and ventilated place Failure to observe safety procedures outlined in the manual may cause serious injury