MasterGel Pro

MasterGel Pro thermal gel goes a step above in thermal dissipation for advanced users. CentEase sell Cooler Master Malaysia. Polymer oxides in the compound create high conductivity between the CPU and cooler base to transfer heat quickly. The powerful formula is still easily applied and removed without damaging the base.

How To Use Thermal Pastes

1. Apply paste to the base of the cooler

Applying paste to a square cooler is a bit more challenging than a round one, because simply placing a dot and applying pressure will not result in full coverage.Centease sells Cooler Master Malaysia. There are varying approaches that people claim allegiances to, so we’ll cover a few of the more popular ones.

2. Install the heat sink 

If you are using either of the line methods, apply even pressure to the heat sink as you install it to ensure that the paste covers the entire surface. If you are using the spread method, you MUST install the heat sink at a slight angle to prevent bubbles from forming. This is because the paste is usually spread too thin to compensate for bubbles after pressure is applied.

3. Reconnect the fan to the motherboard 
The CPU fan wire should be plugged in the CPU fan socket because it mostly has the PWM function which allows the computer to adjust the fan speed automatically without changing voltage.

4. Boot the system altogether

Check that the fan is spinning. Enter the BIOS by pressing F1 or Del key during POST. Check if the temperature is normal, CPU temperature should be below 40 degree Celsius when idle, same for GPU.