The 1/8th combo set is combined with 4076 2000KV sensorless brushless motor, 120A brushless ESC and LED program card. The ESC is designed for 1/8 scale RC car with the use of 2-4s LiPo battery or 4-8s NiMH battery. When you connect the ESC with the program card, you could tune and tweak parameters that add up to an incredible RC driving experience.

Features:
High RPM oversized bearings.
High purity copper windings maximizes efficiency.
Precision engineered for maximum energy conversion.
Short stator, less wire, lower resistance, more power.
Precision balanced rotor, smoothness for best reliability and maximum RPM.
Using advanced software interface to set up or update the software.
Enhanced throttle response, excellent acceleration, strong brakes and throttle linearity.
Built-in switch mode BEC has powerful output to supply all the electronic equipments.
Multiple protection features: Low voltage cut-off protection, over-heat protection and throttle signal loss protection.

Motor Specifications:
KV: 2000KV
Max current: 135A
Max watts: 2800W
Sensored: No
Can diameter: 40mm
Can length: 76mm
Shaft diameter: 5mm
Shaft length: 20mm
Voltage: 7.4V(2S)-18.5V(5S)
Weight: 355g

ESC Specifications:
Continous current: 120A
Burst current: 600A (10S)
Battery: 2-4S Lipo / 4-8S NiMh
Power supply plug: T-plug
Motor plug: 4mm banana connector
Cooling system: Yes
Size: 50 * 35 * 40mm
Weight: 114g

LED Programming Card Specifications:
Low-voltage cut-off: 3.1V, 2.8V, 3.3V, 0V
Smart modes: Medium, soft, strong
Max brake force: 100%, 25%, 50%, 75%
Max reverse force: 25%, 50%, 75%, 100%
Neutral range: 6%, 9%, 12%, work state
Size: 60 * 46 * 6mm
Weight: 21g

Package Information:
Package size: 11 * 8.5 * 6cm / 4.3 * 3.3 * 2.4in
Package weight: 529g / 1.17lb
White box package

Package list:
1 * 4076 2000KV Sensorless Brushless Motor
1 * 120A Brushless ESC
1 * LED Programming Card