Before use, remove tissues, car seats, food and
other items that usually have direct contact with skin.
Apply product through the AC/heater ventilator and
external ventilator. Then, ventilate air inside the vehicle.

For Internal vent

1) Insert the enclosed straw into the spray nozzle.
2) Turn off the AC/heater. Insert the straw into the
    ventilator as far as it will go. Then, spray.
    (one time use: Spray for 15-20 seconds)
3) After spraying, follow the directions below for
    ventilation.

For External vent

1) Turn off the AC/heater. Turn on the fan to maximum.
    Set the air circulation mode to external air intake.
2) Spray into the external ventilator located under the
    wiper blades. It may be located in different places
    depending on the car model and type. (One time use:
    Spray for 15-20 seconds)
3) After spraying, follow the directions below for ventilation.

For Ventilation: Turn on the engine and open all doors.
Turn on the fan to maximum. Adjust the air-flow
direction to the front of the car. Allow to ventilate for
10 minutes. (Don’t enter the car during ventilation)

	SALADDIN SPRAY – Aqua
	- Product’s high-pressure jet gun removes molds, germs and bad odors from every inch of vehicle’s air conditioner and heater. - Contains green tea’s catechin for enhanced deodorization.
	USAGE INSTRUCTIONS Before use, remove tissues, car seats, food and other items that usually have direct contact with skin. Apply product through the AC/heater ventilator and external ventilator. Then, ventilate air inside the vehicle. For Internal vent 1) Insert the enclosed straw into the spray nozzle. 2) Turn off the AC/heater. Insert the straw into the ventilator as far as it will go. Then, spray. (one time use: Spray for 15-20 seconds) 3) After spraying, follow the directions below for ventilation. For External vent 1) Turn off the AC/heater. Turn on the fan to maximum. Set the air circulation mode to external air intake. 2) Spray into the external ventilator located under the wiper blades. It may be located in different places depending on the car model and type. (One time use: Spray for 15-20 seconds) 3) After spraying, follow the directions below for ventilation. For Ventilation: Turn on the engine and open all doors. Turn on the fan to maximum. Adjust the air-flow direction to the front of the car. Allow to ventilate for 10 minutes. (Don’t enter the car during ventilation)

	SALADDIN SPRAY – Forest
	- Product’s high-pressure jet gun removes molds, germs and bad odors from every inch of vehicle’s air conditioner and heater. - Contains green tea’s catechin for enhanced deodorization.
	USAGE INSTRUCTIONS Before use, remove tissues, car seats, food and other items that usually have direct contact with skin. Apply product through the AC/heater ventilator and external ventilator. Then, ventilate air inside the vehicle. For Internal vent 1) Insert the enclosed straw into the spray nozzle. 2) Turn off the AC/heater. Insert the straw into the ventilator as far as it will go. Then, spray. (one time use: Spray for 15-20 seconds) 3) After spraying, follow the directions below for ventilation. For External vent 1) Turn off the AC/heater. Turn on the fan to maximum. Set the air circulation mode to external air intake. 2) Spray into the external ventilator located under the wiper blades. It may be located in different places depending on the car model and type. (One time use: Spray for 15-20 seconds) 3) After spraying, follow the directions below for ventilation. For Ventilation: Turn on the engine and open all doors. Turn on the fan to maximum. Adjust the air-flow direction to the front of the car. Allow to ventilate for 10 minutes. (Don’t enter the car during ventilation)