# Photos are for illustration purpose only.
# Package Content:
- 1 x 8" inches Magic Sediment Filter
- 1 x 8" inches Magic Pre-Carbon Filter
- 1 x 8" inches Magic UF Membrane Filter
- 1 x 8" inches Magic Post-Carbon Filter
# FREE GIFT:
1 X 1 meter tube hose
1 X 8 units elbow filter connectors
# SHIPPING INFO:
* via SINGPOST / FEDEX
* Estimate Arrival: within 2 - 3 days.
Tong Yang Magic Water Dispenser replacement cartridges:
Compatible: 8900c, 8230c, 8910c & B100c
This is Genuine Magic Filters set, 8" inches, "U" type; Sediment Filter, Pre-Carbon Filter, UF Membrane Filter, Post-Carbon Filter.
Magic filters are imported from Korea, its can removes chlorine, chemical and bacteria out of water and produce cleanest, pure and fresh water for daily use.
# Functions:
Sediment Filter
- As pre-treatment filter of water purification system removes bigger than 5 contaminants such as dirt, sand and oxide pollutants from tap water and protect membrane and pre carbon filter from being clogged.
Pre-Carbon Filter
- Prevent hydrolysis of membrane and enhances the life of membrane, it also absorbs residual chlorine and organic chemicals from tap water. The efficient removal of chlorine from water, thus providing a source of water which taste good and more likely to be consumed.
Post-Carbon Filter
- This filter removes any unfavorable taste or odors and gives the water very pleasant taste and also absorbs residual chlorine and organic chemicals from tap water.
UF Membrane Filter
- Has as small as 0.05 ~ 0.3micro pore size is well suited to remove bacteria, clay, particle, materials. However, the containing minerals in water pass through UF membrane filter have a superior water purification capability.
# Instructions guide:
Step 1.
Power off the machine & stop your water supply.
Open top casing, drain off the water reservoir tank, and clean it up with cloth.
Step 2.
Unmounts/unplug the filters from tube hose and re-connect the filters back 1 by 1 in sequence and flushing water filters for 5 minutes before connect the tube hose back to reservoir tank.
*Follow the input/output connection sequence.
(3 FILTERS SYSTEM)
1. Sediment,
2. Pre carbon,
3. Post carbon
(4 FILTERS SYSTEM)
1. Sediment,
2. Pre Carbon
3. UF MEMBRANE FILTER/ALKALINE FILTER,
4. Post Carbon,
Step 3.
Turn on your water supply to refill the reservoir tank with new filtered water, once the water tank is full, then power up the machine.
CAUTION:
DO NOT POWER UP WATER DISPENSER When NO Water Supply, It may cause overheat/malfunctions, if there is no water inside hot tank/reservoir tank. And we shall not liable for any malfunctions/overheat issue due to customer faults.
