Work with ATT 700MHz 4G Lte Band 12/17 network frequency
Could reduce dropped calls,improves the voice quality and fatest 4G Lte
Could work for about 1500sq.ft
Could be suitable for a large house,home,office,villa,garage,basement and so on
It is better to determine the exact in different location until the highest signal strength is received on your phone(most amount of bars). Once you ascertain the best location then permanently mount the outdoor antenna.Keep the distance between the outdoor antenna and indoor antenna should be above 22ft and make sure a proper amount of physical separation between outdoor antenna and indoor antenna.These things are absolutely critical for this booster to work.

Technical Details

Width : 0.75 cm
Height : 0.75 cm

Product Details

ASIN : B078MJCH81

Product Description

1.The cell phone signal booster could only work with ATT 700MHz 4G Lte Band 12/17 network frequency.
2.This cell phone signal booster could only make the weak signal becomes stronger,it couldn''t create signal,so the Outdoor Antenna should receive 2-3 bars of stable signal in the location where it is mounted,or the booster couldn''t work very well.

Operation Frequency:Band 12
Uplink:698MHz-716MHz,Downlink:728MHz-746MHz
Emission Designator:LTE(G7D)
AGC LEVEL:Uplink:-45.00 Downlink:-56.00
Max.Antenna Gain:Uplink:8.1dBm Downlink:7.85dBm
FCC Classification:B2W/Wideband Consumer Booster(CMRS)

Packing:
Signal Repeater Booster
Outdoor Omnidirectional Tubular Antenna
Indoor Directional Panel Antenna
16ft 5D-FB OD7.5 Coaxial Cable
32ft 5D-FB OD7.5 Coaxial Cable
Power Adapter
English User Manual
Mounting Screw Kit

Installation Guide:
1.Tightly connect the 32ft coaxial cable to the Outdoor Omnidirectional Tubular Antenna
2.Check and find a place where your cell phone can receive the best signal outside your house,then mount the Outdoor Omnidirectional Tubular Antenna
3.Mount the signal booster device somewhere inside the house,the signal booster should be mounted in a place where is near from the power socket,and have good ventilation
4.Tightly connect the 32ft coaxial cable to OUTDOOR port of the signal booster
5.Tightly connect the 16ft coaxial cable to the Indoor Antenna and the INDOOR port of the signal booster
6.Connect the power adapter to the signal booster