Notification
___________________________________________________

This product is currently sold in the U.S.A
So this product is shipped directly from the U.S.A
Delivery time is 7 to 14 days.
We will do our best to ensure safe and fast delivery.
 ___________________________________________________

[Important check]
Please check when purchasing electronic products.
We ship All the electronics from America.
All electronics are 110v in America
This is american 110v item,too
If you don't use a transformer, the product will break down
You have to use a transformer for this product.
Transformer (110v to 200~240v)
thank you
___________________________________________________



Edifier Exclaim Bi-Amped 2.0 Speaker System (e10)






Product Description

With the combination of smooth curves and straight lines, the all-new Exclaim is a fully active bi-amped 2.0 speaker system, with each speaker driven by its own internal amplifier. Full integral DSP (Digital Signal Processing) and DRC (Dynamic Range Compensation) delivers active crossover frequencies, superb tonal balance regardless of volume setting, and keeps any possible distortion at an absolute minimum. A combined 36 watts RMS of power is on hand to drive a total of 6 internal active speakers. In addition, 2 passive radiators are utilized in the midrange/tweeter housings to raise efficiency and dynamic range, plus 2 supplementary passive radiators to augment deep bass and performance from the woofers. Connecting to any audio device is easy using the 3.5mm auxiliary cable (included). Built in volume and power/standby controls are located on the side of the master speaker unit. Exclaim is a versatile and simple to use speaker system with extraordinary sound. Specifications: Total power output: RMS 8W x 2 + 10W x 2 (DRC on) THD + N (testing level): 10% Signal to noise ratio: ≥85dBA Frequency response: 48Hz-20kHz Distortion: ≤0.5% Input sensitivity: R/L: 700±50mV | SW: 250±50mV Speakers : (Each speaker) Midrange/Tweeter unit: 1-1/2inch (40mm), Magnetically shielded, 8-Ohms Midrange/Treble Housing Passive Radiator: 1-1/2inch x 3 inch Bass: 3 inch (82mm), Magnetically shielded, 6-Ohms Bass passive radiator: 3 inch high excursion design Audio input: Auxiliary 3.5mm Adjustment: Volume, power buttons located on the active speaker Power supply: Switching power supply 20W/12V

Feature

High performance integrated 2.0 speaker system with unique design incorporating straight lines and smooth curves
Each upper section of the speaker contains two 1½ inch midrange/ tweeters, and a 1½ inch x 3 inch passive radiator
Each base section of the speaker contains a 3 inch woofer and a 3 inch passive bass radiator for maximum deep bass effect
3.5mm auxiliary input for audio connectivity
Volume adjustment and power/standby control buttons
High performance integrated 2.0 speaker system with unique design.
incorporating straight lines and smooth curves.
Each upper section of the speaker contains two 1 inch midrange/.
tweeters, and a 1 inch x 3 inch passive radiator.
Each base section of the speaker contains a 3 inch woofer and a 3 inch.
passive bass radiator for maximum deep bass effect.
3.5mm auxiliary input for audio connectivity.
Volume adjustment and power/standby control buttons.
Brand : Edifier
Item model num : e10
MPN(PartNumber) : e10
EAN : 0875674000706
Product Dimensions(LxWxH) : 19x11x31cm ; 2921 g
Package Dimensions(LxWxH) : 38x29x16cm ; 2921 g