Includes 1x moisture filter, 2x o-rings, 2x gaskets, 15x sponges, 15x cotton cylinder. Pump Not Included.
Help to prevent the moisture from pumping into the cylinder or tank. Protect your guns or tanks.
Connect the male connector to the hose of 8mm female connector in the pump. Connect the 8mm female connector to the airgun or tank.
Using the moisture filter may reduce the pumping efficiency.
Note: The cotton cylinders and the sponges should be replaced after 3-5 times pumping. The replaced parts are recyclable after cleaning with cleanser essence. To guarantee the efficiency of holding the moisture, the cotton cylinders and sponges can be recycled for 3 times at most.

Technical Details

Width : 0.07 cm
Height : 0.016 cm
Length : 0.07 cm

Product Details

Product Dimensions
Width : 0.07 cm
Height : 0.016 cm
Length : 0.07 cm

Package Dimensions
Width : 7 inch
Height : 1.6 inch
Length : 7 inch

Item Weight: 0 ounce (View shipping rates and policies)
Shipping Weight: 0 ounce (View shipping rates and policies)

ASIN : B01D2RT3NM

Product Description

The moisture filter helps to prevent the moisture from pumping into the cylinder or tank. This will protect your guns or tanks. But it may reduce the pumping efficiency because the cotton and the sponge take up some room and less air will be pumped in at single stroke.
The filter has one male connector and one female connector on each side, they are all designed to work with the standard 8mm quick connector. The male connector will work with the 8mm female connector from the pump. The 8mm female connector will work with the male connector from the cylinder or tank.
The cotton cylinders and the sponges should be replaced after 3-5 times pumping. The replaced parts are recyclable after cleaning with cleanser essence. To guarantee the efficiency of holding the moisture, the cotton cylinders and sponges can be recycled for 3 times at most.