Apple iPhone / iPad / iPod Touch automotive interface Apple car diagnostic test line

CLK's wireless network allows you to wirelessly connect your car OBD2 diagnostic socket via iPhone or iPod touch.

If you are connected to a computer， you need a wireless LAN wireless router device.

Use compatibility statistics
After 1996， please refer to ELM327 RS232 / USB / Bluetooth for OBD2 function.
The test vehicle type of reference to foreign test data， but different countries in different regions of the same car， may be due to depot regionalization with different results

Support PC-side software list:
Dashcommand by PalmPerformance for Win 95/98 / ME / NT / 2K / XP / Vista / 7
ScanXL
ScanMaster - ELM V2.1

Support iPhone iPod Touch Software List:
PalmPerformance DashCommand (about 49.99)
FuzzyCar
FuzzCodes
LogWorks
PLX Recorder
DevToaster 2.0.2 (about 39.99)

PLX WiFi connection

Tips: Apple Store Online Store AppStore download to buy related software!
Dashcommand， ScanMaster is currently available.

specification:
SSID: CLKDevices
IP: 192.168.0.10
Subdomain network: 255.255.255.0
Transmission port: 35000
Range: 50-500 meters (indoor / open)
Antenna: Built-in
Power consumption: 0.85 watts
Wireless standard: 802.11a / b / g
Operating temperature: -15 to 100 degrees Celsius
Shell: Molded Case

硬体操作说明：
使用iPhone 4，iPod，iPad的连线：
选择的Wi - Fi
勾选CLKDevices
请将iPhone 4，iPod的，iPad的设定为固定的IP的IP地址:192.168.0.12，192.168.0.20等等。
子域网255.255.255.0
传输埠35000

使用电脑连线：
網路連線>無線網路連接">进入控制台>网路连线>无线网路连接
点选[内容]
Internet协议（TCP / IP协议）
勾选[使用下面的的IP位址]
的IP位址：192.168.0.12?等
子域网：255.255.255.0
按[确定]
按萤幕右下角时间旁的[电脑无线]检查基地台状态
双击[CLKDevices]
显示[已连接上]即可

Dashcommand（DsahCMD）：
连线设定：的OBD - II接口类型：榆林
连线设定：辅助输入类型：无

也支持安卓手机：