Product Description

Instructions for Magnetic Door Stop Stainless Steel - 3-Inch Magnetic Door Stopper with Catch Door Stop Instructions 1. Unscrew the bolt from the doorstop using a 10mm socket or wrench, which will release the base plate. 2. Position the flat side of the base plate on wall and mark screw holes. 3. Drill 7/32-inch pilot holes. 4. Insert plastic wall anchors. (Optional if no stud is found) 5. Insert bolt into base plate and install with screws. 6. Install the magnetic doorstop by twisting to tighten. Catch Instructions 1. Remove the base plate from the catch by twisting to the left. You may use a screwdriver by inserting the head into one of the holes. 2. Position the catch base plate on the door and mark screw holes. Make sure the catch and doorstop align perfectly for a strong hold. 3. Drill 3/32-inch pilot holes. 4. Tighten screws on base plate. 5. Install the catch on the base plate by twisting to tighten.

Very sturdy, heavy-duty magnetic doorstopper...strong enough to hold as a commercial doorstop. It conveniently holds doors open as you are going in and out with your hands full. It easily latches to the magnet and stays open until you gently tug on the door to close it. This is great for office, industrial and commercial use and works so well that you will want it in your home as well. Door stopper wall or door stopper floor install. Metal door stopper.

Comes with wall anchors and screws for easily install.

Feature