Dear Customer:
Welcome to MCpower shop
If you have any question please send e-mail to 290658393@qq.com
WeChat：15205950654
QQ：290658393
Thank you ，hope you enjoy your shopping here!!
BH-02 Bluetooth headphone Stereo Headphone Stereo Wireless
Bluetooth Headset
SPECIFICATIONS
Model no | BH-02 | Ver. | Bluetooth V2.1+EDR |
Bluetooth Profiles | HSP，HFP，A2DP，AVRCP | Effective Range | 10Meters |
Music Time | 10 Hours | Talk Time | 11Hours |
Standby Time | Up to 250 Hours | Iuput | DC : 5V/180mAh |
Charge Time | 3 Hour | Dimensions | 14.5*10*6CM |
About BH-02
BH-02 is a stereo headset with Bluetooth technology. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
Overview
1 | Retractable string | 2 | !#!lt!*! key :last song |
3 | !#!gt!*! key :next song | 4 | LED Indicator |
5 | Multifunction button (MFB): answer， end and reject call， pause and play |
6 | + key: volume up | 7 | – key: volume down |
8 | Charging port | 9 | Built-in microphone |
Charging the battery with USB cable
- Step1: Insert USB charging cable into USB port of PC.
- Step2: Connect charging cable with the charging port of headset.
- When the red light is on， the headset is charging.
- When the blue light is on， the headset is charged fully.
- It takes about 3 hours to charge the headset fully.
Warning:
- The battery is rechargeable.
- First time charging : Before you use this Bluetooth headset， please charge the battery of headset fully
How to use
A Switching on / off headset
Function | Operation | LED indicator | Indication tone |
Switch on | Press and hold the MFB for 3 seconds | Blue LED is on for 1 second | “Do Do Do” tone |
Switch off | Press and hold the MFB for 6 seconds | Red LED is on for 1 second | “Do Do DO” tone |
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure BH-02 in power off status first. Press and hold the MFB for 6 seconds， till Red and blue Led blink alternately， or you hear the indication “Do Do” twice come out. And then release the MFB. The unit will become pairing mode.
B) Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows:
- Please keep the headset and mobile phone in the range of 1 meter when pairing.
- Start the Bluetooth function of mobile phone and search the Bluetooth devices.
- Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”).
After searched， select “BH-02”in the Bluetooth device list.
- According to indication， enter password or PIN No:”0000”， and press the key of” Yes” or “confirmed”.
- After successful pairing， select “BH-02” in the Bluetooth device list， and press “connect”.
- After successful connecting， the blue LED of the headset quickly blinks twice or three times every 4 seconds.
Wearing the headset
The string of this headset is retractable， please adjust according to the actual use. Logo “L” of headset represents left ear， Logo “R” of headset represents right ear. Please wear the headset according to the indication of the Logo.
Making calls with the headset
Function | Status of headset | Operation |
Voice dial | Standby mode | Press and hold MFB for 2s， release it till hearing indication sound |
|
