1.Cap screw: 0.47 inch in depth, the depth of the plywood or board should be more than 0.47 inch or the screws will expose on the back if the plywood or board is too thin.
Use for indoor & Outdoor climbing. Can be installed on wall and board
Set of 5, suitable for 3-7 years old children, let your little child get exercised.
Package Included: stones, cap screw, washer, hex key, inner expansion bolt
LIFETIME - If these climbing wall holds give you any trouble, ever, we will make it right. That is it. We stand behind our quality and customer service. Know your rock wall will be there to entertain kids for years to come.

Technical Details

Product Details

Package Dimensions
Width : 7 inch
Height : 3 inch
Length : 7 inch

Shipping Weight: 2.15 pounds (View shipping rates and policies)

ASIN : B019ZBGN1E

Product Description

Instructions for installation
1.Fix to solid timber boards.(2cm thickness).
2. Configure the layout for each stone and mark the position.
3.Side image shows the location of fixing holes.
4.For the larger of the 2 holes, use an 11 mm drill-bit to drill a hole completely through the solid timber board.
5. On the back of the timber insert the star shaped grub nut and gently tap in with a hammer so in beds into the timber.
6.Place the large hole over the pre-drilled hole. Adjust the stone to set position and make sure it can be held correctly. Fasten using cap screw into the star shaped grup nut.
7.Insert large cap screw into back of timber and screw tightly using an allen or hex key.
8.For the small hole, use a phillips screwdriver to screw in the samll fastner. Provided to lock the stone into place.Pre-drill location hole first. Please Note All mounting hardware is included with your product. Here at HappyPie Climbing Gear we make our climbing holds out of recycled material. Each set comes with various colours and fun shapes. All children must be supervised by an Adult.