Tool unnecessary, easy desorption!

Pedestal for mounting · Holder body for fixing smartphone · Silicone band and product structure are simple and described on the product page finely with photographs, so assembly and assembly are completed without 5 minutes. It is comfortable to say that tools are unnecessary. Because it is a ball joint type, it is easy to adjust the angle such as adjusting the visibility by the installed smartphone or weather. Because I often use a 5.5 inch smartphone, depending on the weight and size of the terminal itself, there were the following problems with inexpensive smartphone holders. · Silicone band can be removed · Stretch · Holder breaks · Screw breaks · Ball joint part becomes weak (smartphone faces downward by its own weight) 2 weeks using this product can be used without problems at this time. Although it is affected by daily desorption, ultraviolet rays, rain, etc., I hope to be able to use it for a long time.

It can not be used subtle in Xperia

Used attached to a scooter. Without using rubber, even with simple installation just to pinch it will not move unexpectedly, it is strong enough to be unlikely. The rubber band also contains two, so it is really great to replace it when it gets degraded. The ball-shaped movable part is also not bothersome with somewhat step difference. Also, although somehow it was understood before buying it, near the middle of the side, there are buttons such as power supply and volume etc that you can not use a terminal Android, if there is a back button etc. on the bottom the rubber band disturbs I can not operate · · · It is regrettable that somehow, I feel like I was made based on iphone. 【Additional notes】 The other day, I caught the theft of the holder itself ... It is easy to detach and attach the holder, I felt that it would be prevented from theft by removing it for a long time. For good products only, if you stolen you will be very dented, so please take care of everyone. [Additional notes 2] It is understood that this is also conceivable, but the height of the hold part is not enough when bunkering is attached, the bunkering can not be used in the way of disturbance · · · those who are using bunkering ring Please attach.

Simple but excellent

We attached clamp bar to VT 250 SPADA of Sepahan and installed it. Since the mounting part is made of metal, it does not bother the tremor of running. The fixation of the smartphone is fixed at the side on the side and further protects the four corners with a silicon band, but I think that this is quite an idea. The angle adjustment of the smartphone is also very easy. Although it is not suitable for those who frequently put in and out smartphones, it is a recommended item for riders who use smartphones as navigation. For this review, we are providing products from "Teyimo". Moreover, at that time, we do not accept any goods / money other than goods / money, promise of high evaluation etc.

No worries about falling

There is nothing to worry about falling because it holds good rubber and hold feeling. I use it on a motorcycle, but it seems to be uneasy. Because it is made of metal, it is solid and it is likely to be used for a long time. I think that it is good to have sold only rubber if I think whether it is expendable item though spare rubber is attached.

Used with spigen's rugged armor on iPhone 6S

I think that the pedestal is painted black paint exactly for light alloy die casting. Since it is die-cast, the mechanical strength of the ball joint part is unknown. Fortunately, since the holder part is solid, we attach small wires to prevent falling and bind it with the steering wheel. I think that it's okay so it's just a town ride by bicycle.

Mounting bracket

The mounting hardware is a bolt, feeling that a bit of ingenuity is necessary when installing. Since it is an attachment feeling installation, even if it does not go well depending on the part to be caught ... ... is the support rubber for holding the smartphone? I think whether it is okay without it, but if it is attached for prevention of falling it will be no mistake.

It is simple but secure

The price is cheap, but the ball joint of the mounting part can be fixed firmly with metal. Silicon band has a feeling of security with no play and is fixed perfectly. I use it by bike tooling but it is good without wobbling. One deduction is that it is surprisingly troublesome to remove and remove the silicon band.

Because it is broken in 3 months ★ Mitsuda ... But ease of use is worth ★ 5.

The pinch spring is strong and stops the four corners with a rubber band, so there is a sense of security, and the rubber band is very convenient because it can be slightly shifted from the switch or earphone terminal and can be fixed. However, in 3 months the movable side of the main holder has come off. It seems that the stopper part of the spring has come off. I can not do anything because I do not know the internal structure. But purchase again as it is easier to use than other holders.