Item Descriptions:

Active noise canceling compatible

The BNC 80 incorporates an active noise canceling (Active Noise Canceling) chip,

It is possible to cancel the noise due to the reverse phase signal.

Inside the aircraft, Shinkansen, train, from around

You can reduce the noise by about 85% and play music in a quieter environment.

The principle of active noise canceling

Built-in active noise canceling chip in BNC 80 headphones, hear it

You can accurately measure noise.

The best control signal can be obtained by dedicated smart chip, furthermore

, Utilizing a highly accurate secondary sound source, generates an opposite phase wave having an effect of canceling noise, and generates an inverse phase signal

It is possible to cancel the noise due to.

85% of noise from the aircraft, bullet train, train and surroundings

While reducing, you will be able to comfortably listen to music in a quiet environment at any time.

* Active Noise Canceling (Active Noise Canceling) is mainly used in train, airplane, indoor

The function aimed at removing the reverberation sound in.

Corresponds to Bluetooth ver. 4.1

Adopt advanced chips of CSR, equipped with high sound quality · low delay codec apt-X, stereo sound and

High sound quality is realized.

A2DP, AVRCP, handsfree calling etc. Profile correspondence possible.

Bluetooth ver.4.1 compatible smart phone, tablet, walkman, television and other devices

You can enjoy wireless sound and handsfree calling by connecting with.

Call

When you hear the ring tone from the headphones, press the multifunction button (MFB button)

You can answer / end / refuse the phone.

Listen to music by cable connection

When you can not use the Bluetooth function such as in the aircraft, or quiet that does not require the cancellation function

Even if the battery is depleted or the batteries are not inserted, the included 3.5 mm audio cable

When connected, it can be used as a general headphone.

Convenient and easy USB charging method

It is equipped with a lithium-ion battery and supports USB charging.

Maximum for about 3 hours full charge

It is possible to play for about 15 hours for a long time.

Even if the battery runs out, it is normal with the supplied audio cable

You can use it as headphones.

Adopted a convenient swivel mechanism for storage

The ear cup part can be folded inward, housed in a compact carrying case

It is possible to carry easily.

When going out to school, commuting, business trip, traveling, outdoor etc.

It is convenient.

Comfortable fit feeling

Adopting a low-resilience material cushion and a flexible headband so as to gently wrap your ear,

A comfortable fit and sense of tightness are realized.

Adjustable ear pads and ear cups can be rotated freely

Depending on the design, comfortable wearing comfort is hard to get tired even for a long listening.

basic specifications:

Bluetooth version: 4.1

Bluetooth chipset: CSR 8645 w / apt-X

Noise cancellation rate: 85%

Speaker: 40 mm neodymium

Audio impedance: 32 Ω

Charging time: about 3.0 hours

Charging method: Micro USB charging

Bluetooth communication distance: 10 meters (no obstacle)

Input terminal: 3.5 mm stereo mini jack

Music playback time (when BT function is on): about 15 hours

Music playback time (when BT, ANC function is on): about 12 hours

Battery type: lithium polymer battery

Dimension: 21.0 (L) × 16.0 (W) × 5 (H) cm (when stored)

Weight: Approximately 239 g

Package contents:

1 * Headphone body

1 * 3.5 mm audio code

1 * 6.3 mm stereo conversion plug

1 * Conversion plug inside aircraft

1 * USB charging cable

1 * mesh bag

1 * Carrying case

1 * English manual

※ Japanese version of PDF version can be supported.

Maker

Warranty period

: 12 months from the date of purchase

Pairing method with Bluetooth device:

【1】 Place the Bluetooth device within 1 m of this machine.

【2】 With the power OFF, press and hold the left (L) power button for 10 seconds or more and the LED will flash alternately blue / red, you will enter pairing mode.

【3】 Perform pairing operation with Bluetooth device and search for this machine "BNC 80".

【4】 Please enter "0000" when you are prompted for a password with a pair setting request.

【5】 When pairing is completed, the blue lamp of headphones will flash every 4 seconds.

How to use Noise Canceling:

When the power is on, pushing the right (R) switch up and the right (R) LED turns on blue, the noise canceling function turns ON.

About calls:

Receive a call

When you hear the ring tone from the headphones, press the left (L) MFB button once.

To hang up the phone

In the call state, press the MFB button once.

Reject incoming calls

Press and hold the MFB button for about 3 seconds when receiving an incoming call.

Switch calls

In the call state, after pressing the MFB button for about 3 seconds, when you hear "beep" sound, switch to the mobile phone.

Play / pause music

Press the MFB button once to play the music.

Press it again to pause.

To the next song

Press the MFB button twice to enter the next song.

* Depending on the device, the above operation may not be performed.

Please check the instruction manual that came with your equipment.

Notes on use:

※ Please charge the machine fully before use.

* Before using the Bluetooth function for the first time, pairing setting is required for Bluetooth device and headphone, please fully charge.

※ This unit can use Bluetooth function and noise canceling function at the same time.

※ To achieve the best noise cancellation effect, the volume control on the headphone section can not be used hermetically sealed design.

(You can adjust the volume and select music with a connected Bluetooth device.)

* If you hear the noise "shoe" slightly when turning on the power again after turning on the noise canceling function with the power off, it is a normal function and stops after a few seconds.

※ When pairing is impossible, fully charge this machine.

Please check that the power is on.

* Make sure that this unit and Bluetooth device can be paired within 10 meters without other devices or obstacles (walls etc.).

* Check the Bluetooth device to be connected to see if the Bluetooth function is enabled.

Please check the instruction manual that came with your equipment.

* Depending on the device, when pairing is completed it may be automatically connected to the unit with Bluetooth connection.

* Depending on the specifications of the mobile phone, the operation of the mobile phone may be different from the operation of this product.

Features:

• Please enter model number Confirm this is compatible:
• BNC 80 has active noise canceling (Active Noise Canceling) chip built in it, and it can cancel noise due to reverse phase signal.
• You can reduce the noise from the aircraft, Shinkansen, train, and surroundings by approximately 85% and play music in a quieter environment.
• By connecting with Bluetooth ver.4.1 compatible device, you can enjoy wireless music.
• High sound quality / low delay codec apt-X is installed and high sound quality is realized.
• A2DP, AVRCP, handsfree calling etc. Profile correspondence possible.
• It is equipped with a lithium ion rechargeable battery, and continuous recharging for up to 15 hours is possible with charging for about 3 hours.

Product information:

Shipping Weight: 630 g

Package Dimensions: 7.11 x 25.09 x 31.09 cm