Package includes :<br />1 x 10A Solar Street Regulator<br />1 x  10W 12V PolyCrystalline Solar Panel with 2 Alligator Clips And 4m Cable<br /><br />10W 12V PolyCrystalline Cells Solar Panel:<br />-High efficiency and excellent performance <br />-It comes with block diode (stop reverse discharge)<br />-Provided with 2 alligator clips and 4m cable<br />-Suitable for a variety of equipments， emergency lights， advertising lights， traffic lights，  electric fans， solar water pumps， motorbike， boat， etc..<br /> Power: 10W<br />Voltage: 12V<br />Material: PolyCrystalline+  Transparent Epoxy Resin <br />Weight: 267g                                                                                                                                                                                                                                                            <br />Dimensions: 38 x 22cm  (LxW)<br />Cable Length: Approx. 4m<br /><br />10A 12V/24V Solar Controller :<br />-Overcharging protection.<br />-Can be used for all panels.<br />-Overdischarging protection.<br />-Short and Open Circuit protection.<br />-Advanced design with simple plug and play technology. <br />-No need for complicated adjustments.<br />Color : Black<br />Size : 14 x 8.8 x 2.5cm<br />Rated charge current : 10A<br />Rated load current : 10A<br />Work voltage : 12/24V<br />Over load， short circuit protection : 1.25 rated load current 60sec， <br />                                                        1.5 rated loads current 5sec， <br />                                                         over load protection action. ≥3 Rated load current short <br />                                                         circuit protection action.<br />No load current : ≤6mA<br />Charging circuit voltage drop : ≤0.26 V<br />Load circuit voltage drop : ≤0.15 V<br />Over voltage protection : 17V; ×2/24V<br />Work temperature Industry stage :-35℃ to +55℃<br />Boost charge voltage : 14.6V， ×2/24V (keep 10min)<br />Direct charge voltage : 14.4V， ×2/24V (keep 10min)<br />Float charge voltage : 13.6V， ×2/24V<br />charge return voltage : 13.2v，×2/24V<br />Temperature compensation : -5mv/℃/cell (Boost charge， Direct charge， Float charge， charge return voltage)<br />Lower voltage indicate : 12.0V， ×2/24V<br />Over discharge voltage : 11.1V(no load)- real-time modified voltage by the discharge rate， ×2/24V<br />Over discharge return voltage : 12.6V， ×2/24V<br />Control mode : PWM charge mode， modified discharge voltage by the discharge rate<br /><br />How To Use :<br />1. Digital LED display shows the 16 lighting options (by switch with 5 seconds)<br />2. Number display， from 0 to 7， DC output.<br />3. Number display， from 0. to 7. 1Hz output.<br />4. Digital LED stop flash to confirm correct switch selection.<br />5. 10 minutes delay to make sure its real dark.