Specification

Product Overview

Cooler Master HTK-002 thermally conductive compounds are grease-like silicone materials, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed and high-temperature stability. Centease sells Cooler Master Malaysia.These compounds resist changes in consistency at temperatures up to 177 C (350 F), maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device. 

How To Use Thermal Pastes 

1. Apply paste to the base of the cooler.

Applying paste to a square cooler is a bit more challenging than a round one, because simply placing a dot and applying pressure will not result in full coverage. There are varying approaches that people claim allegiances to, so we’ll cover a few of the more popular ones.

2. Install the heat sink 

If you are using either of the line methods, apply even pressure to the heat sink as you install it to ensure that the paste covers the entire surface. If you are using the spread method, you MUST install the heat sink at a slight angle to prevent bubbles from forming. This is because the paste is usually spread too thin to compensate for bubbles after pressure is applied.

3. Reconnect the fan to the motherboard 
The CPU fan wire should be plugged in the CPU fan socket because it mostly has the PWM function which allows the computer to adjust the fan speed automatically without changing voltage.

4. Boot the system altogether

Check that the fan is spinning. Enter the BIOS by pressing F1 or Del key during POST. Check if the temperature is normal, CPU temperature should be below 40 degree Celsius when idle, same for GPU.