Item Descriptions:

Product length / length (for variation):

100 cm

There is no such trouble at night:

Do not you feel like trying to find a switch in the dark?

If the movement is too big, will people get awake soon as soon as possible?

Wake up frequently in the middle of the night, if you put on electricity it is bright and your eyes hurt?

Will you hurt your baby's eyes by seeing strong light?

After turning on / off the light, does the life become short?

If there is a dual sensor LED tape light:

The sensing range of the sensor spreads radially.

The ambient light is off enough for lunch.

It turns on automatically at night, and lights up when people move is sensed.

If there is no movement for a certain period of time, it returns to the standby state.

It does not give unnecessary influence and discomfort to people by lighting the feet or the necessary range.

It emits soft light with light bulb color and is easy for adults and children's eyes.

Because it is an LED light, it withstands opening and closing more than 1 million.

Can be used in various scenes:

Around the bed

Corridor

Entrance

Armoire

drawer

kitchen

toilet

Baby Room

The stairs

Veranda

...

Product content: (USB charge adapter is not included in this product.)

100 cm:

100 cm LED tape light * 1, USB cable * 1, battery box * 1, light sensor * 1

150 cm:

150 cm LED tape light * 1, USB cable * 1, battery box * 1, optical sensor * 1

150 cm * 2:

150 cm LED tape light *

, USB cable * 1, battery box * 1, optical sensor * 2, connection cable * 1

When products arrive, let's test first.

Loosen the back cover of the sensor by hand and remove it.

Rotate the time switch clockwise to the very end and set the write time as short as 30 seconds.

(The notch shows the time.)

Connect the USB cable to the charging jack of your (own) USB charging adapter.

Connect the USB cable and the light belt with a sensor.

Insert the USB charging adapter of yourself into the power outlet and turn on the light.

Wait 30 seconds until the light disappears at a distance of 2 meters or more.

Cover the sensor with a pillow or towel without leakage and wait until the light shines again.

Make sure the light disappears in 30 seconds with a distance of 2 meters or more.

With the above procedure, confirmation of sensor photosensitivity and tape light lighting function is completed.

If you can not proceed like this procedure, please contact us immediately.

Let's start the installation when the test is over.

Please wipe the place to be stuck before installation to a dry towel etc and clean it well.

Please peel off the double-sided tape on the back side of the light belt, carefully paste it, put in power and push it.

You can adjust the length of the light belt according to your request.

Confirm the cut line and perform cutting.

In case

Connect the USB charging adapter, USB cable, sensor, light belt in order.

Please change the time setting of the light sensor according to your preference.

Test procedure manual and installation explanation will be bundled with the product, please use.

Notes:

Failure due to excessive bending can not be handled as it may cause contact failure if it is forcibly folded.

Please note.

Although the tape part is water repellent processing, the connection part is not waterproof.

If you are concerned about external use please do yourself waterproof treatment.

Features:

• 【Optical sensor and human sensor】 Double sensor function!
• When it is dormant at noon, when the surroundings become dark, the light sensor enters the standby state, when the person comes, the human sensor senses and automatically lights up.
• The time to find the switch by feeling in the darkness will go away.
• 【Easy coloring】 Soft light does not hurt your eyes and your family's sleep is not affected.
• 【Cutting is possible, time setting is possible, Permitting to attach】 It is convenient to install as necessary on the bedside, corridor, kitchen, basement, children room, closet, drawer and so on.
• Get up at night, active as a child asleep and breastfeeding at night!
• 【2 way power supply】 There are two ways of power supply: AA batteries and USB power supply!
• It consumes less power and contributes to saving electricity bills.
• It is water-repellent and has durability.
• LED type: 3528SMD LED quantity: 30leds / m Operating voltage: 5V Length: 100cm / 150cm / 150cm * 2 Width: 0.8cm Thickness: 0.2cm

Product information:

Shipping Weight: 303 g

Package Dimensions: 4.29 x 17.91 x 19.99 cm