Product details

Features:
1.100 levels of vibration
2.100 levels of static shock
3.With no jumps from 0 to 100 levels
4.300 meters remote controlling range
5.Rheostat dial allows for gradual adjustment in stimulation intensity
6.Four modes: static shock, vibration, beep and light
7.Clear LCD screen displaying level of stimulation collar
8.Over 3,000 different identity codes to prevent conflicts with other e-collars
9.The levels can be altered by use of up and down button.
10.A tone button activates a tone on the receiver.
11.The system can be used for 1 or 2 receivers.
12.The receiver will TURN OFF if it is unused for 4 minutes.
13.Any movement will activate the receiver into STANDBY MODE.
14.The transmitter will go into STANDBY MODE if there is no operation after 20 seconds and turn off after 2 minutes.
15.Water Resistance (only rainproof, it cannot be immersed in the water.)
About Transmitter:
To install the batteries, open the battery cover.
the battery cover is at the back of the transmitter.
Open by sliding the over down.
Install the battaryies (4LR4/6V) - ensure the the polarity is correct.
The transmitter will be TURN ON automatically.
Press the buttons one by one: the LCD images will be changeed.
Press the up and down buttons on right hand side to set level
Choose channel 1 or 2 for 1 or 2 receivers
The LED light can be used for giving training signals.
The transmitter will go into STANDBY MODE if not operated for 20 seconds and will TURN OFF if not operated for 2 minutes.
In STANDBY MODE, press any button (except LED light button) to wake it up.
To TURN ON the transmitter, hold mode button at least 5 seconds.
About Receiver and Matching with the Transmitter:
Install the batteries
Remove the cover
Insert the 2 batteries (AAA/1.5v) ensure the polarity is correct.
The receiver will beep.
Go to the transmitter and choose Channel 1 or 2 to encode by pressing the channel button 1/2 in the transmitter.
Press the LAUNCH button on transmitter immediately.
The receiver will beep, by now, it has been encoded to the transmitter.
Replace cover and tighten metal probes.
Package in:
1 x Transmitter
1 x Receiver Collar
1 x Belt
4 x Metal Probe
1 x Testing Bulb
2 x AAA Battery
2 x 4LR44 6V Battery