Item Descriptions:

size:

Camera mount only

UNC 1/4 "Camera Screw mounted, it will be active in various scenes.

Compact camera, drive recorder, strobe etc can be installed.

If you have an optional 1/4 screw adapter, you can also store action cams such as Gopro, smartphones, tablets, microphones and so on.

The clamp part can be mounted on a target with a diameter of about 16 - 35 mm.

Self-shooting stick, monopod, pipe, fishing rod, branch, bicycle and motorcycle bar etc

The pan head part can rotate 180 degrees in the vertical and horizontal direction and 360 degrees in the rotation direction and can be adjusted to the angle you like.

360 degree rotation method: Please rotate while pulling the pan head part and clamp part with both hands and pulling in the opening direction.

Lightweight and easy to carry.

Depending on the idea, you can use it for shooting, recording, recording etc. in the studio, at home, outdoors.

Recommended for small and lightweight equipment.

Be careful not to give a heavy load or strong impact.

* Since there is a 360 degree rotation specification between the pan head part and the clamp, there is some play.

If you want to make it immovable, why do not you try DIY?

Please remove the pan head part as shown on the left figure, tighten the screws (red circle part) of the joint part of the pan head and clamp tightly, and then reassemble.

Contents: Camera holder × 1

* Image camera etc are not attached.

※ There is no instruction manual, it becomes simple packing.

Weight: Approx 91 g

Material: Plastic (Screw part is metal)

If by any chance if it looks like the initial failure, we will resend new products by all means so please contact us so we can contact you.

(Account service → Order history → Ask the seller)

※ Because we can not assume the responsibility of the damage such as the fall of equipment using this product, secondary damage etc etc at our company please understand after purchasing it.

Features:

• Please enter model number Confirm this is compatible:
• 1/4 inch camera screw mounted.
• UNC 1/4 "digital camera with camera screw hole / RICOH / HTC VIVE sensor / 360 degree camera / camera recorder / surveillance camera / IC recorder / tablet / smartphone etc. pipe / bar / branch / fishing rod etc. mount attachment
• is.
• Motorcycle / Bicycle / Car / Motorcycle Handle · You can use a small camera such as action cam / wearable camera / sports camera / SJCAM / gopro / DV / SJ 4000 / SJ 5000 / SJ 6000 mounted on the rearview mirror.
• You can shoot moving pictures while driving, can shoot videos full of powerfulness, and increase the pleasure of bike touring.
• The pan head part can rotate 180 degrees in the vertical and horizontal direction and 360 degrees in the rotation direction.
• It is becoming a click mechanism of the gear, and once it adjusts it will not be misaligned.
• Camera mount: It can be attached to a pipe of about 16 - 35 mm in diameter.
• It is active in studio, home, shooting in the open air, recording, recording etc.

Product information:

Shipping Weight: 90 g

Package Dimensions: 3.99 x 9.80 x 13.49 cm