This is a wonderful dream chasing color LED strip light with 133 modes and brilliant color, which car work smoothly and properly. With 1903 IC inside, it can make sure several light strips work synchronously. Long service life, more than 50,000 hours. It is shockproof, waterproof and dust-proof. It is widely used for home decoration, hotels, clubs, bar, shopping malls, show exhibition, KTV, holiday, event, and it is also applied in backlighting, concealed lighting, channel letter lighting, automobile and bicycle decoration, etc. Get one now!
Light strip:
●Strip length: 5M x 2 Rolls
●LED: 30 LEDs per meter
●LED type: 5050 SMD LED
●Chipset type: 1903 IC
●Power: 72W (7.2W per meter)
●Light color: RGB multicolor
●Lighting angle: 120°
●Working voltage: 12V DC
●Waterproof grade: IP68
●IC qty.: 10 pcs per meter
Controller:
●Dimension: 93 x 58 x 25 mm
●Working voltage: 12V DC
●By adopting two groups of SPI signal outputs, this controller can control the light strip within 50 meters and run 500 pieces of 1903 ICs.
●Adopts controller panel, choose and adjust speed through the wireless frequency remote control with 8 buttons. 133 different changing modes and speeds (please refer to the user guide for details)
●With memory storage function, which means data can be saved even when there is a power failure.
Remote control:
l Dimension: 84 x 36 x 16 mm
l Functions of controller panel:
- ON/OFF
- PAUSE: Play/Pause button
- S+: Accelerate
- S-: Decelerate
- B+: Program choosing button, up direction
- B-: Program choosing button, down direction
- M-: Reducing button, to reduce the IC NUMBER
- M+: Adding button, to add the IC NUMBER
l Remote control: effective in 50 meters
1 x Button battery included (23A 12V)
When using remote controller, you should note:
1. Please do not press buttons (such as M+, M- key) on remote controller. It may lead to mismatching between remote controller and strip light IC quantity and do not light normally.
2. If the strip light cannot light normally, that means off or partly on when you use the remote controller. It may result from mismatching between remote controller and strip light IC quantity.
Please first press OFF key, then press M+/M- key to adjust and control IC quantity. (10 pieces IC per meter.
If you want to add one IC, you should press M+ key one time. There will be numbers for you to refer to on controller box. (After setting, press ON key on remote controller to auto save and start to use.
NO.
Function Description
NO.
Function Description
1
Static red
2
Static green
3
Static blue
4
Static yellow
5