Analog to HD-SDI with HDMI out converter

: Digital Forecast Bridge 1000_AH

NTSC/PAL Composite Analog with Analog Audio L/R to 3G/HD/SD SDI and HDMI Direct Up Converter

• Analog to HD-SDI with HDMI out 
• Inside Up scaling function
• ARC ( FULL, Letter/Pillar)
• 1 Selectable CVBS input ( NTSC/PAL ) 
• 1 Selectable Component input ( SD/HD ) 
• 1 Stereo Analog Audio input 
• 2 HD-SDI out ( SD/HD/3G ) 
• 1 HDMI out ( SD/HD/3G ) 
• DC 7V ~ 24V wide operating range

Introduction

[1000AH] is a mini converter that converts SDI signal to an analog signal (composite / component). Even if playback device and photographic equipment is only compatible with analog video output, and converted into a long-distance transmission possible SDI signal by making use of the [1000AH]. It is possible to connect switcher and professional monitors, projectors, etc. equipped with the SDI input. 
Further, it is equipped with up-conversion function that converts 480i / 720p / 1080i / 1080p analog signal input. Convenience will improve the function of the two-up converter and 2 analog conversion → SDI converter as one. In addition, it is equipped with one HDMI output system with dual SDI outputs simultaneously output is possible, output to check for multiple monitors and the like equipment is possible. 
Input voltage corresponding to a wide range of DC7 ~ 24V. Also AC adapter other than the supplied, power supply from a variety of equipment is available. 
It is a converter of high quality and low-cost to be able to use TV, CATV, hall, studio, stadium, medical institutions, government agencies, etc., in a variety of audio-visual scene.

Features

Conversion to SDI signal from the (component or composite) analog signal

in the environment that does can send only analog signal, and converted into a long-distance transmission possible SDI signal by making use of the [1000AH]. It is possible to connect switcher and professional monitor is equipped with SDI input, the projector or the like. Input signal can be selected from "composite / component" DIP switch.

Up-converted output featured

Equipped with up-conversion function that outputs are converted to 720p / 1080i / 1080p analog input signal. I can DIP switch switching of the output format.

Angle-of-view setting function

so that you can print out at angle of view according to the input image. Can be set "Full / letter (pillar)" from the DIP switch of the main body.

Corresponds to simultaneous output from one system SDI system terminal 2 / HDMI terminal

output terminal is equipped with the system and HDMI1 SDI2 system. I will simultaneously output from terminal 3. The SDI output format, connection confirmation such as monitors in HDMI output terminal, to other devices is possible.

Support a wide range of input voltages to (DC7V ~ 24V)

power supply input voltage corresponding extensively and DC7 ~ 24V. Power supply from the various devices is possible to the AC adapter other than the one provided.

input and output corresponding format

​

Application

Body appearance

• Composite Analog video
  - NTSC/PAL
• Component Analog video
  - 480p (59.94/50)
  - 720p (60/59.94/50)
  - 1080i (60/59.94/50)
• Supports multi-rate SDI formats
  - SMPTE 125M: NTSC (480i 59.94), PAL (576i 50)
  - SMPTE 296M: 720p (60/59.94/50)
  - SMPTE-274M,SMPTE-292M:
  1080i (60/59.94/50)
  1080p (30/29.97/25/24/23.98)
• Digital Audio AES/EBU
  - 48Khz, 75 Ohm , 1 Vp-p