Product advantages
1. Elimination of residual electricity
2. Double switch design, two modes.
3. 3LED Light group
4. USB charging port
5. 1200 mA internal battery
6. 3000V instantaneous voltage output
7. Outer nickel-zinc iron mesh + inner aluminum mesh, safety no electricity leakage
Use Instructions
1. When charging, insert the USB data cable into the mosquito racket interface, and insert the other end into the USB interface of the adapter. The corresponding charging indicator light is red, indicating that the Bug Zappers is in the charging state and the charging takes 2-3 hours. When the charging indicator lights yellow, the battery is fully charged.
2. Mosquito killing and lighting method: Turn the power switch to the ON1 position, press and hold the button switch, and the work indicator light is on. At this time, there is high voltage electricity on the metal mesh surface (do not touch). Twist the handle to swing and make the grid accessible to mosquitoes. After use, release the button switch, the work indicator light goes out, and the power grid is powered off. When the power switch is turned to the ON2 position, the LED lighting bulb is on, and the mosquito killer and lighting can be used at the same time.
3. the use of time: full of electricity, can be used about 100 days.
4. If you do not use it for a long period of time, please charge it once every 3 months, about 2 hours, otherwise it will reduce the battery life.
