General

Model: BT-S1
Quantity: 1 Piece
Color: Black
Material:ABS


Feature:
1. can be realized Bluetooth helmet headset with helmet headset 800 meters (Or 800-1000 meters) meters of direct full-duplex intercom;
2. can be achieved Bluetooth and cellular phones， intercom calls， stereo music and automatic switching between them;
3. mobile phone first， calls automatically switch to the mobile phone to answer calls， hang up automatically after recovery intercom;
4. FM Radio function
5. can be accessed by telephone， refused to telephone and hang up;
6. support for voice switching;
7. through the transmission over A2DP to enjoy the music through mobile phones or connected GPS;
8. can be controlled via mobile phone music AVRCP play， pause， previous song， next song played;
9. there are rumors DSP noise reduction and processing， high-speed exercise to ensure a clear call quality;


Specification:

Bluetooth version: 3.0+EDR
Frequency: 2.4GHz
Supports: A2DP and AVRCP
Supported Bluetooth Profiles: Bluetooth Headset and Hands free Profiles with Automatic Detection
Operating Range: Up to 10m for cellphones
Battery Type: Rechargeable Lithium Polymer 350mAh
Stand by: Up to 300hrs
Talk time: Phone up to 10hours Intercom up to 6 hours
Charging Time: 3hours
Power Adaptor: DC5V 500mA




Dimensions & Weight:

Color Box Size : 11x11x8 cm N.W.: 0.265 KG
Carton Box : 56.5x23.4x18cm ( 20 sets ， G.W.: 6.0KG)
Carton Box : 56.5x23.4x42.2cm ( 50 sets ， G.W.: 15 KG)


Packing List:

1 x BT-S1 interphone （without helmet）
1 x Rider speakers and microphone
1 x Clamps
1 x USB cable (80cm)
1 x Power adapter (100~240V)
1 x English user manual

To pair to your Bluetooth enabled mobile phone:

When the unit is off， press and hold the power/intercom button at the end of the unit. Hold the button until you see a RED AND BLUE light flashing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a “DuDu” tone when the unit enters pairing mode. On your phone， search and attempt to pair to the device， when the device is flashing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device