This is a Pair of LED Headlight conversion kit that suitable for vehicle that with H11 bulb size. Our High-quality, high-power 40W 4800LM LED car headlights made by the latest LED light source chips known as XHP-50, Unlike the other LED headlight Kits in the market, our philosophy is to lenghten the life span with greater output. We do not want to use fan as a heat dissipation source, as it will caused to performance decrease due to dust from engine bay. Instead, we are persist to improve and implement the current aviation aluminum & Red Copper radiation system. The aluminium and red copper can accelerate the heat dissipation better than fan operated.

Power: 40W (Brighter than 75W Halogen Headlights)

Voltage:DC12V-24V

Material: Aluminum

Color temperature: 4300K/6000k
Beam Angle: 360 degree
Input: 2.2A ± 0.1A

Lumens: 4800lm/bulb

LED chip: XHP-50
Certified by CE, RoHS, IP68

LED itself with overheats protection circuit.

     a.) Color temperature can be optional. (Now available: 3000k, 4300k, 5000k, 6000k)

     b.) Keep the LED from scratch when installation in the car.

     c.) Create 360 degree lighting performance.

Have a temperature sensor protection system.(It means when the temperature going high up to 90 degrees, the brightness will be decreased to 60%, after the proper temperature come back, brightness will be recover to normal very fast.) 

R3 Automotive LED headlamps advantages:

1. LED Headlight is more brighter than traditional halogen/HID energy, more power saving with more power output.
2. LED lights light up without delay like HID, to enhance road safety.
3. Instant start no strong currents impact, improving battery life of more than 30%.
4. Fast cooling with the most advanced design, Aluminium radiator system enables fast heat dissipation.
5. High Durability.
6. Latest LED design with simple structure , fewer components damaged, the broken chances is 80% lesser as compared to HID.
7. Less Heat. Low temperature with 0 UV protect headlamp from fading. Unlike Xenon working with high temperature, the main reason for the car ignition failure.

Installation Cautions:

1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.