Item Descriptions:

Waterproof cycle computer

Spacer can be used between the bracket and the handle by securing the body sheet to the handle with a band.

Attach the wireless sensor with the bicycle front fork and decide the distance between the sensor and computer ≤ 60 cm.

The sensor and the magnet are mounted on the same side, and the sensor corresponds to the magnet magnet.

Since the distance between the magnet and the sensor is 1.5 mm, adjust the equivalent position therebetween.

Confirmation of installation: Turn the front wheel of the bicycle and check whether the signal is on the display and adjust the relative position of the magnet and the sensor if there is no reaction or dull response.

Open the battery cover and insert the CR2032 (3.0 V button battery) battery in the battery box. Note: With the battery plus (+) facing up, please close the battery cover tightly after installation.

If it is not used for more than 300 seconds, it will be the clock display only and will automatically switch to sleep mode.

You can wake by pressing any button, and you can recover the mode and value before shutdown.

Ideal bicycle training assistant.

Mobile convenient!

Great activity in outdoor activities such as cycling and hiking!

Your sports life will be more free and comfortable.

Applicable to all types of motorcycles.

Road bike, mountain bike, folding bicycle, standard bicycle etc.

Display display function is attached, bicycle speed, mileage and running time can be measured.

Wireless wires design, no electric wire in the way, lightweight, strong and durable.

With waterproof function, do not worry even bad weather, you can run with wind and rain, please feel easy!

Green backlight, even when the lighting is dark, it is easy to read.

Package contents:

1, bicycle computer

2, sensor

3, sheet

4, band

5, magnet

6, CR 2032 battery * 2

7, double-sided tape

function

- Current speed

- Mileage DST

- Maximum speed MXS

- Average speed AVS

- Travel time DTM

- Clock CLOCK

- Scan SCAN

- Low voltage prompt

- Auto save

- Set kilometers and miles

- Backlight

- Tire circumference setting

- Auto sleep

Features:

• With a multifunctional speedometer, it is possible to measure speed, mileage, running time, it is a necessity for cyclist rubber.
• Multi-function installation: Measurement unit selection (KM / hr, Mile / hr), clock setting (12 H / 24 H), auto scan function, automatic recording, stopwatch, mileage, running time, etc. can be measured.
• Backlight: If you press any button within the range from 17 o'clock to 7 o'clock in the 24 hour system, the bag light will last 4 seconds and the other hours will not shine.
• If you want to continue the backlight for a long time, just press the left and right buttons at the same time, you only have to press and erase at the same time.
• Even if the backlight is attached, the lighting is dark, it is easy to read.
• Automatic Dormancy Power Saving Function: If you do not use it for more than 4 minutes, it will be clock display only and will automatically switch to sleep mode.
• You can wake by pressing any button, you can recover the mode and value before shutdown
• Applicable to all types of motorcycles.
• Road bike, mountain bike, folding bike, standard bicycle, wireless waterproof design, lasts longer.
• There is no unnecessary electric wire, even bad weather is safe.
• One year 's quality assurance, during this period, if any problems occur, the product can be replaced / refunded according to the contents of the inquiry from the customer.

Product information:

Shipping Weight: 90 g

Package Dimensions: 4.29 x 8.30 x 12.09 cm