Description:
<br />
<br />L298P Shield DC motor driver adopts the L298P driver chip wich is exclusively made for large-power motor
<br />It can drive 2 DC motors directly with a drive current reaching 2A
<br />The motor output is equipped with eight high-speed schottky diode as protection
<br />This driver carries neat circuit layout and bonded components, in addition, the multi-layer design enables it to be plugged to Arduino directly
<br />L298P Shield DC motor driver carries PWM mode. The motor can be powered via Arduino VIN input or terminal input on the driver, which are switchable by jumper
<br />
<br />Specification:
<br />
<br />Logic part input voltage : VD: 5V
<br />Driving part input voltage VS: VIN input 6.5 ~ 12V, PWRIN input 4.8 ~ 24V
<br />Logic part working current Iss:  36mA
<br />Driving part working current Io:   2A
<br />Maximum dissipation power: 25W (T=75 )
<br />Control signal input level: High level: 2.3V   Vin   5V Low level: -0.3V   Vin   1.5V
<br />Working temperature: -25   130 
<br />Driver form: Dual power H bridge driving
<br />Size: approx.6 cm x 5.3 cm x 2.3 cm
<br />According to wiring method above, we can control the transferring, reversing, stopping of two DC motor (M1 and M2), as well as the speed regulation of PWM
<br />
<br />Package Includes:
<br />
<br />1 x L298P Expansion Board