100% Brand new and high quality
INSTRUCITIONS:
Our pumps are carefully tested and inspected to ensure they are functional and safe.
Please follow this guide in order to avoid any damages to the pumps themselves.
ADVICES:
Do not connect the pump to a different voltage than the one shown.
Do not suck any flammable liquid fluids.
To avoid short circuits, please use the pump only in containers not larger than 152 cm.
Do not immerse into too hot water (more than 35°) (95°F).
PRECAUTIONS:
Always disconnect the plug before handling the pump.
Do not use it without water.
Do not grab it using its cable.
Use only cold water.
Use the pump only if completely immersed.
Functioning:
Neither clog up the entrance of the pump nor suck any dirty liquids.
Should the pump be used on a dirty surface, lift it a bit so that a contact with debris is avoided.
To lower the flood of water, use the control lever located on the side of the pump.
Immerse the pump into the water before connecting it to the plug.
At the very beginning, the pump may not work out properly as it might have some air inside, so just take it off the water and immerse it again: it will surely work out.
UPKEEP:
Remove the frontal part of the pump and the fan and wash them under flowing water.
Do not remove the drum of the pump.
It the pump does not work out, please check that:
The pump and its outlet are not clogged up.
Remove the frontal part and check that the fan runs the proper way.
Check the pump monthly.
Specifications:
| Item number | AT-420 |
| Delivery head Hmax | 220cm |
| Power consumption(watts) | 35W |
| Flow drat (1/h) | 2000L/H |
| HZ | 50Hz |
| Operating Voltage (volts) | AC 220-240V |
| Outlet connection | 13/16/19mm |
Dimensions: 126*82*110MM (L x W x H)
Color: Black
Size: 35W
Style: AU Plug
1 x Water Pump Submersible Pump Fish Tank Fountain
1 x 13mm Outlet Connection
1 x 16mm Outlet Connection
1 x 19mm Outlet Connection