Optimum Opti-Eraser is a high-tech foam block laminated with an advanced acrylic resin that safely and effortlessly removes gloss-hindering contaminants from your vehicle’s painted surfaces. Unlike a traditional clay bar which requires constant re-kneading and must be used with extreme care (don’t drop it!), the Opti-Eraser requires far less maintenance and if you accidentally drop it on the ground, simply rinse it off with warm water. The Optimum Opti-Eraser can only be described as the evolution of the clay bar!

The Optimum Opti-Eraser is a dense foam block that’s laminated with an advanced acrylic resin on the two largest sides. This high-tech resin essentially shaves off above-surface contaminants that would otherwise interfere with the proper bonding of your wax, sealant or coating. After using the Optimum Opti-Eraser, your vehicle’s paint will be as smooth as glass and ready for polishing or waxing. The aggressive grade Opti-Eraser is ideal for vehicle’s that are heavily contaminated.

Directions:

1. Do not work on hot panels in direct sunlight.
2. Dilute Optimum No Rinse Wash & Shineto the recommended clay lubricant ratio.
3. Working one panel at a time, spray a liberal amount of lubricant onto the area and without using any pressure, rub the Opti-Eraser back and forth until it glides freely. It’s perfectly normal to feeling it grabbing at first.
4. When the Opti-Eraser moves across the surface without any effort, remove excess lubricant with a soft microfiber towel and move on to next panel.

Do not store wet or damp.

Note: This is the heavy/aggressive grade version of the Opti-Eraser. If your vehicle is new or well maintained, we would recommend using the light/fine grade version of Opti-Eraser.