Passive PoE Injector Switch / PoE Power Swith
Supply power & data to 250 Meters
8+2 Ports (2*Uplink, 8 * PoE) 10/100Mbps
Compatible with IEEE 802.3af/at
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Included power adapter : 48V-52V 120 Watt
Wall Mount
This is an Passive Power Over Ethernet of 8+2 port 10 / 100Mbps-T Ethernet switches, including 8 unsolicited PoE Ethernet ports and 2 Uplink ports. With an external 110V-240VAC to 48-52VDC power supply adapter, any one of the 8 port can provide output power, each Ethernet port can provide network transmission speeds of up to 10 / 100Mbps , with Cat5 / 5e / 6 network cable.
This passive poe power switch compatible with IEEE 802.3af/at Mode-B(4,5+/7,8-) , but it can not detect the 802.3af/at terminal device.
It supplies power NO MATTER WHAT, so don't plug the "Power Link 1~8" side into anything not fit for it .
This POE switch only support 10/100Mbps, PoE ports do not support Gigabit ethernet, because "Power Link 1~8" port using 4,5,7,8 pin for power transfer, Please do not connect any "NONE PoE gigabit ethernet device and Uplink device" on "Power Link 1~8" port, this will damage your device.
Gigabit(1000Mbps) ethernet Uplink device can only access "Up link" port, Please do not access it to "Power Link 1~8", it will damage your device.
Compatible all 802.3af/at device , such as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....
Features:
8 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Ports PoE function
Midspan Mode-B Unsolicited Power(4,5+/7,8-)
Supports PoE power up to 120W for all PoE ports, Per port Max 48/52V 0.5A or 30Watt
Supports PoE IEEE802.3af/at compliant Powered Device (PD)
Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
Full/half duplex transfer mode for each port.







