It is the best size and depth for pan wobbling.

Silver body is very beautiful, I think that it is light for the size.

It is satisfactory.

It's handy and comfortable to use. It is good not to be too heavy in handling.

Durability & Functionality of Teflon processing and 935 g in weight without impairing overheating properties of thick bottom frying ♪ ♪

In this section, review target of 【IH-Lumiere】 brand 【28cm stir-fryer】 developed by Niigata 【Ursayama Metal Industry (UMIC)】 with emphasis on lightness. The company has been active as a professional aluminum and stainless steel for more than half a century, and recently in addition to its technology, received the technology of Teflon processing (fluororesin) from [Kemers] which draws on the flow of the US [DuPont] IH is working on the manufacture of high-quality pan made of plywood which also corresponds to cooker. The appearance is roughly rounded like a wok, and the depth is also about 7 cm, so it is easy to use because the ingredients are hard to jump out and shake vigorously with stir-frying cooking. Teflon processing is given to the inner surface processing as mentioned above, among which three-layer fluorine processing of ceramic type called "Teflon ™ Platinum" is adopted, and its durability has improved to 6 times the initial Teflon processing I will. Its color tone is black with sparkle like fine lame, but it is achromatic, there is no blue tint hidden in the further higher processed item. Although the touch is not glossy, there are slight roughness, but since the particles are very finely and uniformly attached to the whole surface, I think whether it will become a factor that promotes abrasion. And the outer surface is finished with total stainless steel without any decoration, it has become a splendid mirror finish. It is literally enough to reflect its own face and distortion is less, so it is really enough to use instead of a hand mirror. On the other hand, the bottom surface is polished to keep the level horizontal, but it is not a mirror finish, but since it is not separately affixed with a disk type electromagnetic induction belt, the outer surface is integrally finished without any irregularities It is very easy to clean. In addition, the handle is made of resin and receives a slightly weak grip force impression, but also has a dent that also serves as a burn prevention doubling thumb, and easy to hold itself is not bad. The installation also uses a general-purpose Phillips screw, and it is easy to reclaim on your own if you have relaxed with aged deterioration. As a peculiar point of this product, its metal processing method is mentioned, and on the bottom surface which is easily deformed by being heated, while leaving the conventional thickness, the upper part of the pot not strongly affected by the thermal power (edge ) Has been thinned to the limit of durability. It has several advantages, not only the lightness of cutting a weight of 1 kg even in a diameter of 28 cm × a depth of 7 cm, coupled with the high thermal conductivity of aluminum, the heating efficiency is improved while keeping the heat retention property . As a precaution, there are warnings to say that "high heat ignition is prohibited" to prolong Teflon processing everywhere, and special mention about this product is "Heat efficiency is good so that medium heat will withstand practical use enough" and it is also appealed It was. Although not mentioned about the use of metalware, it was stated that sharp cookware such as spatula and chopsticks is undesirable. Actually used, it seems that the heating efficiency certainly seems to be good, and when we tried a simple kettle competition with some pots, it was not suitable for an aluminum pot with a thickness of about 1 mm, but it was not suitable for the original duke [DuPont] I overwhelmed the same diameter pot. Of course, since it is beginning to use, I tried cooking nearly 20 meals with medium heat using wood bellows & wood chopsticks according to the above mentioned notes satisfactorily, but there is no decline in use feeling. If the only difficulty is raised, since the outer surface is a general-purpose stainless steel material, the polishability is high, but the antifouling power when overflowing is high is not high, and the point like "high-temperature ignition prohibited" will echo here . The company has clearly categorized the "country of manufacture and corresponding equipment & use" for each brand, and this product [IH - Lumiere] is "made in Japan & IH / gas cooker compatible & lightweight household For "for. The package is a paper box, so please be careful not to throw away with the brave foot because the back side of the tag wrapped around the pot also serves as a description. Overall, the weight and durability are kept intact, the weight is reduced by several tenths compared to the conventional product, and the mirror surface finish improves the simplicity of care. The quality is also a polished finish that makes it feel like a flowing stone Japanese factory, both inside and outside with no fine irregularities and no scratches, I felt it was a wonderful perfection degree, so I added a relatively inexpensive point and it is a perfect score without a complaint.

This is MADE IN JAPAN quality!

This is made in Japan! It is a gem that can be moved. Impression that jumped by one head at all of the non-rattling, strength, moderate weight at the joint part of each part ♪ Conversely, I admired that I was able to do well at this price. The goodness of separation at the time of making an egg grill can be cooked well because the heat is transmitted uniformly and the grilling eyes are beautiful and it slips quickly. And I can really understand that this moderate depth is also thought of and it is thought that using a line drawn from cheap ones sold for ions etc. is used. If anything, I also thought that it would be better to set the lid as well, but I thought that cost was suppressed accordingly, I thought that the lid is unnecessary to the contrary is a nice place . As foreign manufacturers who have gone through their name make it, the quality is like lightly over 10,000 yen. I felt the greatness of MADE IN JAPAN that does not disappoint the buyer's expectation.

IH compatible frying pan (frying pan, 26 cm) which made use of metal processing technology in Japan

IH compliant frying pan that made use of metal processing technology in Japan. Good quality is also felt from the appearance. Usability is good because the thermal conductivity is good, so it is good for fire and it is difficult to stick with Teflon · coating, so I think that it is very easy to cook. It is easy to clean. However, it is not special say, lightweight. Spinning processing is given to the side of this product. Spinning processing is a processing method in which a material is pressed against a rotating mold by pressing it with a roller or a spatula (roller in this product). It seems that we can lighter weight than press working, and it is excellent in thermal deformation resistance. Weight reduction of this product is not a contrivance of shape etc., because it is lightweight by processing method, we think that it can be regarded as improving the quality as a frying pan although the effect as weight reduction is small . As mentioned above, I can feel the goodness of quality, so I think that there is enough value for the price. The cross section structure of this product is stainless steel, aluminum, 3 layers Teflon (*) · coating from the outside. For Teflon coating for cooking utensils in Japan, currently 6 ranks / 7 types (all 6 types except one type, aluminum coating) consisting of 2 to 4 layers are provided, but books Teflon · platinum (3 layers) adopted in the product is positioned at the 2nd rank from the top among Teflon · coatings. This product has a coating with such a reputation like this, but to make it last longer, the feeling to work with the coating is important. For example, avoid sprinklers from metal, let's use wood or resin. High temperature, sky firing etc. are NG. (*) DuPont (DuPont) has spun off the three business divisions, including the world's largest fluorine business, into independent companies worldwide, and the Chemors company was born. Therefore, "DuPont · Teflon" is currently a trademark of Kemers. By the way, DuPont and Dow Chemical merge to become Dow · Dupont, after integration, it will be divided into three independent companies, agriculture related business, materials science business and specialty chemical business .

Realize the high quality made in Japan

Beautiful appearance like the mirror finish of iPhone main body. Thick Teflon processing is not likely to peel off with a little or gentle thing. I am building firmly in this way, and it is easy to swirl the stir-fry. However, one weakness disadvantage is the weight that comes from its ruggedness. This product has 900 g, but it is 50 g heavier than the same size T - Fal fry pan. 26 cm is slightly lighter than this because T - Fal frying pan is 850 g. However, T-Fal fry pan has thin Teflon, it is not secure even if you take it, so if you shake it strongly it will rattle. On that point, since this product is installed, it is sturdy even if you swing it. Weight is a disadvantage as well as a merit at the same time. The reason is that it stabilizes on the stove. The T - Fal frying pan is heavy in handle and the body of the frying pan is lightweight, so it is very unstable in the state before putting stir - fried ingredients, and it will overturn by its own weight if it gets slightly. This frying pan is not oriented towards lift, but if it is placed it will stabilize by its own weight and will not be attached with grub before putting ingredients. I realize the high quality made in Japan. Ruggedness is good, weight is fault.

The exterior polished carefully by "Japanese technology" is mirror finish!

Niigata's "Safety, safety, high quality made in Japan" IH cooker adopts the best two-layer clad material (stainless steel - aluminum composite material). IH Corresponding to all heat sources such as electromagnetic cooker, gas, radiant heater, sheath heater, halogen heater and plate heater. (Excluding microwave oven) It is lighter than I thought, but because the diameter is long and wide, it may be the case that you feel "weight". Excellent heat retention and thermal conductivity, easy to clean. Do not make anything decent, we can not make anything decent, such as "Please be careful because it is dangerous to pass through a strong fire too much" against the pot of fire using fire Wasted make Korea made, stop being a Japanese You should use Urushiyama metal made! I strongly thought that.

Awesome texture

This is a 26cm pan, it's already reaching the area of ​​artworks I can not say anything Glossy and design something to cook is inconveniently cool parent design If Japanese manufacturers seriously make it There is too much feeling and the likability degree is infinity. Although it is a solitary man's cooking, it seems that the taste seems to be getting better just by having somehow Because it is small, it is exactly good size for a solitary good enough moderate weight feeling It is really refreshingly sweet (· ·) (..)