Functions:

Reset Inspection and Oil Service

Workable Models:

Old For BMW built in 1982-2001 with 20 pin diagnostic socket located in the

engine compartment.

 Operating Instructions:

1.Plug the Device into the OBD2 socket of the car
2.All LEDs will blink and than stay on
3.Turn ignition key to enable the board electronic but don't turn on the mot
4.Press the button for the operation you want to perform shortly
5.The LED of the chosen operation will light and the other LEDs will be off
6.Keep the button pressed
7.Reset is done when the LED is turning off itself
8.Release button

On some dashboards there is needed to make a inspection reset before a oil reset